Canon 1450B002 - PIXMA MP510 All-in-One Photo Printer Інструкції з налаштування - Сторінка 2

Windows

MP Drivers Installation

®

Note

• The screens below refer to Windows XP Service Pack 2 installation.

Screens may vary depending on the operating system you are using.

• For Windows XP or Windows 2000, log on to Windows as a member of the

Administrators group before continuing.

• Before installing the driver, disable all anti-virus programs and automatically

loading programs.

a

Turn off the machine.

(1) Press the ON/OFF button.

(2) Make sure that the POWER lamp stops flashing.

b

Turn the computer on and start Windows.

Important

If you see the Found New Hardware Wizard, remove the USB cable. Click

Cancel to quit the screen. Next, turn off the machine. Then proceed from step

3 to install the MP Drivers.

Insert the Setup CD-ROM. The setup program should run

c

automatically.

Note

The setup program should run automatically. If the installer in the CD-ROM does

not run automatically, click Start and select My Computer, then double-click the

CD-ROM icon

.

When the main menu appears, click Easy Install.

d

Note

• Select Easy Install in order to install the MP Drivers, on-screen manuals, and

application software. Select Custom Install in order to choose the options you

would like to install.

• To install Adobe

RGB (1998), click Custom Install and follow the on-screen

®

instructions. If you are using Windows Me/98, Adobe RGB cannot be installed.

e

When the list of applications to install appears, confirm the

contents, click Install.

Note

Move the cursor over items to display explanations of each application below.

Part no. QT5-0453-V02 © 2006 Canon Inc. "Windows" is a trademark of Microsoft Corporation, registered in the United States and other countries. "Macintosh" and "Mac" are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. "Adobe" and "Adobe RGB (1998)" are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other product and brand names are trademarks

of their respective owners. Specifications subject to change without notice.

Read the License Agreement carefully and click Yes.

f

Follow the on-screen instructions to install the software.

If a message asking for your confirmation to restart your

computer appears, click OK.

g

When the Printer Connection screen appears, connect the

machine with a USB cable, then turn the machine on. The

software will begin identifying the printer port being used.

Important

If you cannot go to the next procedure after 3 minutes, refer to "Trouble-

shooting" instructions in the User's Guide on-screen manual.

h

Follow the on-screen instructions to register your product.

Note

When the User Registration screen appears, follow on-screen instructions to

register your product. You will need your product serial number, which is located on

the inside of the machine. See Step 1-

on the front page.

f

i

When the Installation completed successfully screen

appears, click Exit.

If Restart is displayed, make sure that the Restart the system now

(recommended) check box is selected, then click Restart.

Now you have completed installation of the

software.

Macintosh

MP Drivers Installation

®

Important

Since Mac

OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or

®

earlier are not supported, do not connect the machine to these.

Note

• Use Mac OS X v.10.2.8 to 10.4.x.

• The screens below refer to Mac OS X v.10.4.x installation. Screens may vary

depending on the operating system you are using.

• Log on as an Administrator before continuing.

• Before installing the driver, disable all anti-virus programs and automatically

loading programs.

a

Connect one end of the USB cable to the computer, the

other to the machine.

Note

Make sure the machine is turned on.

Turn on your Mac.

b

c

Insert the Setup CD-ROM.

Note

If the CD-ROM folder does not open automatically, double-click the CD-ROM icon

on the desktop.

Double-click the Setup icon.

d

e

When the Authenticate screen appears, enter your

administrator name and password. Click OK.

If you do not know your administrator name or password,

click

, then follow the on-screen instructions.

When the main menu appears, click Easy Install.

f

Note

Select Easy Install in order to install the MP Drivers, on-screen manuals, and

application software. Select Custom Install in order to choose the options you

would like to install.

g

When the list of applications to install appears, confirm the

contents, then click Install.

Note

Move the cursor over items to display explanations of each application below.

Read the License Agreement carefully and click Yes.

h

Follow the on-screen instructions to install the software.

i

Follow the on-screen instructions to register your product.

Note

When the User Registration screen appears, follow on-screen instructions to

register your product. You will need your product serial number, which is located

on the inside of the machine. See Step 1-

f

on the front page.

When the Installation completed successfully screen

j

appears, click Restart.

The system is restarted automatically.

*When connecting from Mac OS X v.10.3.3 or earlier:

Restarting the computer while connected to the machine may cause the

machine not to be detected. To resolve this, either unplug the USB cable

then plug it back in again, or turn the machine off then back on again.

k

After restarting the computer, start Printer Setup Utility

(start Print Center if you are using Mac OS X v.10.2.8) and

then check that the printer name you want to use is shown

in Printer List. If the printer name is not displayed, click

Add to add the device.

For more detailed instructions, refer to the Mac on-screen

Help.

Now you have completed installation of the

software.

Printed in Vietnam.