EKF EA4-COUNTRY Посібник з механічного монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з механічного монтажу для PCI карта EKF EA4-COUNTRY. EKF EA4-COUNTRY 3 сторінки.
Друкувати сторінку
Title: Mechanical Installation Manual of the EA4-COUNTRY
If the mounting holes in the front of your Express Card have not the conformal position of PCI
Express Card Specification, you have to go on with the steps 7 to 9.
Otherwise, if your mounting holes are conformal to the PCI Express Card Specification, go on
with step 5 + 6 and leave the steps 7 + 9.
5. Lay the two jackets (5) between the the
bracket of the express card and the EA4.
6. Tighten the two screws (3)
from the bottom in the Express Card
bracket.
Lay the washer (1) and the snap ring (2) on
the screws (3) and tighten the screw nut (4).
7. Lay the two mounting cubes (8)
between the the bracket of the
express card and the EA4.
The notch of the cubes have to be on the
Top side, so that the screw thread of
the bracket fit into the notch.
8. Tighten the two screws (10) from the Top
of the PCI Express Card.
File:
ea4_mim.odt
Page
2 of 3
(similar picture)
(similar picture)
(similar picture)
(similar picture)
Release:
2020-06-19, mja