Daan Tech Bob Посібник із швидкого старту - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Посудомийна машина Daan Tech Bob. Daan Tech Bob 14 сторінок.

2 | h

eatinG

leMentS

The heating disk must be cleaned thoroughly to avoid clogging and

reduced rinsing performance.

Once per month or every 30 cycles

To access the heating disc, please remove the 3 filters.

Then remove the protection part of the heating disc and clean it.

You then have access to the heating disc, clean it with a non-

abrasive sponge in order to avoid damaging (scratching) the non-

stick coating.

Put the protection part back in place.

Then reinsert the 3 filters.

3 | C

over and SCreen

Depending on the amount of soil on your Bob.

To clean the exterior of Bob, simply wipe it with a damp cloth

Please do not use any scouring agents, chemical solvents or strong detergents as this

could damage the coating of Bob.

To prevent water from getting into the electronic components, screen, buttons or door lock

system,do not use a cleaning spray.

4 | S

pray arM

If you encounter problems with the spray arm and have observed that it no longer turns, it may

be a nozzle blockage that prevents it from turning. In this case, please follow the instructions

below to clean the spray arm.

To remove the spray arm, unscrew the ring at base of the

spray arm with one hand.

Wash the spray arm under running water and remove any food

residues from the spray nozzles.

Put it back in place and make sure that nothing hinders its

rotation.