Daan Tech Bob Посібник із швидкого старту - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Посудомийна машина Daan Tech Bob. Daan Tech Bob 14 сторінок.
Друкувати сторінку
3 | W
aSh CyCle
3.1 | How a wash cycle works
You can follow the progress of the current wash cycle on Bob's screen
DAILY
Before starting a wash cycle
y
Make sure that your dishes are positioned correctly in the basket
y
Put detergent (gel or tablet or powder) inside the tank
y
Close the door. Warning: the cycle cannot be initiated if the door is open or not properly closed
y
Choose the most appropriate program according to your dishes and the degree of soiling
y
Start the cycle on Bob's display
y
Fill the water tank until the signal sound occurs if your Bob is not connected to a water
supply
Warning: Ensure that the drain hose is correctly positioned at a water drain
or a container during the entire cycle. Water is drained several times during
a cycle.
Let's go! The cycle is running now!
During a wash cycle
Cancelling an ongoing cycle
y
Press the central button
to pause the current cycle.
y
Select
N O
to cancel the current cycle and to launch a drain.
y
You will automatically be redirected to the home screen.
12
Remaining time
(minutes and seconds)
Icon of the current program
Adding extra items during an ongoing cycle
y
Press the central button
to pause the current cycle.
y
Open the door and pay attention to the escaping hot steam
y
Place the additional item in the basket
y
Close the door
y
Select
to continue the cycle
YES
Warning: If you want to cancel a cycle or add additional items, you must press the central
button to interrupt the program.
At the end of the wash cycle
When the timer is close to zero, the "Drying in progress" icon is displayed.
At this point, the door opens automatically and remains half-open with a 10
degree angle.
Warning Please note that hot steam is released when door opens
Depending on the program, drying might take several minutes and will not
consume additional energy. The program is not completed yet; please wait
a few minutes for the drying to finish before removing your dishes.
Warning Please note that some items are very hot and could cause
skin burns if removed too soon. Daan Tech shall not be responsible
for such incidents, which occur when dishes are removed before the
Please note that some water
offical end of the cycle.
residue may remain on your
dishes if you do not wait for the
drying to finish.
When the program is completed, a signal sound occurs and Bob will automatically go into standby
mode.
Upon completion of the program, leave Bob's door open (10°) to prevent unpleasant smell. This also
reduces the energy consumption in the standby mode.
13