eKids iHome B90 Посібник

Переглянути онлайн або завантажити pdf Посібник для Навушники eKids iHome B90. eKids iHome B90 12 сторінок.

Друкувати сторінку

Introduction

Your new Bluetooth stereo headphones are designed to link with your Bluetooth enabled smartphone

or music player to allow you to wirelessly listen to music and answer phone calls within the normal

10 meter (33 feet) Bluetooth operating range.

What's Included

• Bluetooth Stereo Headphones

Charging Cable

Specifications

Bluetooth specification:

Supports V4.1+ EDR with Handsfree Profile 1.5, Headset Profile 1.1 and A2DP

profile 1.2 (Class ll) and Audio/Video Remote Control Profile AVRP

Battery:

350mAh

Standby time (unpaired):

up to 90 days (with fully charged battery)

Talk time:

up to 16 hours (with fully charged battery)

Music Playing time:

up to 12 hours (with fully charged battery)

Operating Distance:

up to 10 meters / approximately 33 feet

Certifications:

CE, FCC, RoHS, BQB

Getting Started

1. Controls and Indicators

Right side

Left side

2. Charging Your Headphones

IMPORTANT: Your headphones operate on a built-in rechargeable lithium-ion battery. Although the

battery was fully charged when it left our factory, like all rechargeable batteries it can begin to

discharge during periods of non-use. We recommend that you charge the battery for at least 2.5

hours before first time use.

Computer connected

to working outlet

USB Adaptor

1. Connect the micro USB plug on the charging cable to the micro USB port on the headphone.

2. Connect the standard USB plug on the charging cable to any standard USB power port such as

found on a notebook computer, or the charging adapter for an iPod, iPhone, etc.

The Power/Charging/Pairing indicator will glow RED while the headphone is charging. The indicator will

turn off when the battery is fully charged.

Reminder: Allow the battery to charge fully before first time use. Normal recharge time should take

about 2.5 hours. When fully charged the battery provides up to 16 hours of working time, or 90 days of

standby time.

Because your B90 headphones use Bluetooth version 4.1 the battery level indicator of the headphones

may also appear on your iPhone home screen, usually adjacent to the phone's own battery level

indicator, if your specific phone supports this display function.

3. Multi-Function Button (MFB)

Pressing the Multi-function button (MFB) turns the headphones "On", initiates pairing, answers/ends

phone calls, controls Play/Pause function and turns the headphones "Off'.

4. Switching the Power On and Off

1. Press and hold the Multi-function button for approximately 3 seconds. The voice prompt will say

"Power On" and the LED indicator turns BLUE and flashes two times per second. If the headphones

have not been previously paired to a Bluetooth device, the headphones will enter auto-pairing mode.

2. When the power is "On" press and hold the Multi-function button for approximately 3 seconds. The

voice prompt will say "Power Off". The LED indicator remains on briefly and then shuts off. This

indicates that the power is "Off".

Model:

HEADPHONES

• USB

• Detachable Audio Cable

1. Multi-function button: Power On/Off,

Answer/End, Pair and Play/Pause.

2. Power/Pairing/Charging LED Indicator

3. Volume Up (+) Button

4. Skip Track Forward Button (

5. Volume Down Button ( - )

6. Skip Track Reverse Button (

7. Microphone

8. Micro USB Charging Port

9. Auxiliary Input Jack

Computer USB port

(not included)

5. Manually Pairing With a Bluetooth Enabled Smartphone or Music

Player For The First Time

B90

If your smartphone, music player, tablet, or computer is Bluetooth enabled, you may pair these

headphones with your device to listen to music and make or receive calls as long as the two devices are

within the Bluetooth operating range of approximately 33-feet of each other.

Note: Your headphones must be in the Power "Off" mode to begin the manual pairing process.

1. Make sure that your B90 headphones are switched "Off". Make sure that your smartphone or music

player is "On".

2. Press and hold the Multi-function button on your B90 headphones for about 6 seconds until you hear

the "Power On" and "Pairing" voice prompts. The LED indicator begins alternately flashing blue and

red to indicate it is trying to pair with a compatible device.

3. If necessary, turn on the Bluetooth function of your phone or music player so that it begins searching

for a compatible device.

4. "ekid B90" should appear on your phone or music player's compatible devices list. You may also see

a message such as "Not Paired". Tap on that message to complete the pairing process. If your phone

or music player asks for a "password" to complete the pairing process, enter '0000' on the keypad of

your phone or music player.

5. When pairing is successful the screen on your phone should show "ekid B90 Connected" or similar

message and you will hear the voice prompt say "Your device is connected". The LED indicator on the

B90 headphones will begin flashing blue two times per second. Your headphones are now ready for use.

NOTE: If your B90 headphones are not able to find a Bluetooth device that is in range and

"discoverable" after 3 minutes, the headphones will automatically power "Off" to preserve the battery.

6. Auto-Linking With A Previously Paired Device

If your B90 headphones were previously paired with a Bluetooth enabled smartphone or music player

they will attempt to auto-link with that device again whenever that device is within the Bluetooth

operating range.

Press and hold the Multi-function button on your B90 headphones for about 3 seconds until you hear

the "Power On" voice prompt. If a previously paired device is found to be within range and turned 'On'

the B90 will re-link with it automatically. You will hear the voice prompt say "Your device is connected."

Controller button

Note: If no previously paired device is found after 3 minutes the auto-linking function stops and your B90

headphones shut off automatically to preserve the battery life.

Microphone

7. Wearing Your Headphones

Your B90 Bluetooth headphones are supplied with padded ear cushions for long lasting comfort. The

headband can be extended to accommodate almost any head size. There are 'L' and 'R' markings on

the inside of the headband, When the headphones are worn properly the controls will be on your right

side.

8. Using Your Headphones

Note: Some of the functions described below may not be supported on your specific smartphone.

Check with your smartphone owner's manual to confirm the features supported by your phone.

Function

Turn headphones "On"

Turn headphones "Off"

Enter Pairing Mode

Pairing

Reset Bluetooth

Play / Pause

Skip to next track

Skip to beginning of current track

)

or go to the previous track.

Increase volume

Decrease volume

)

Answer an incoming phone call

End a call

Siri/Google Assistant function

9. Auxiliary Input Jack

The auxiliary input jack allows you to use your B90 Bluetooth headphones as normal headphones so

that you can listen to music on any non-Bluetooth device that is equipped with a 3.5mm headphone

jack.

Connect the included audio cable to the auxiliary input jack on the

bottom of the 'L' earpiece of your B90 headphones, and to the

headphone jack of your auxiliary music source.

Your B90 headphones should be in the Power "Off" mode. Use the

volume and track navigation controls on your music player as your

would with any normal headphones.

Troubleshooting

1. Reception is noisy or intermittent

Make sure that the headphones and the paired device are within the Bluetooth operating range of

approximately 33-feet. Make sure the headphones are fully charged as well.

2. No Sound

Make sure that your headphones are properly paired and connected with your Bluetooth enabled

smartphone or music player. Refer to the "Pairing" instructions in this manual and in the manual

supplied with your phone or music player if necessary.

The rechargeable battery in your headphones may be exhausted and need to be recharged. Refer to

the "Charging Your Headphones" instructions in this manual.

3. Unable to Pair/Connect

The pairing settings between the headphones and your smartphone or music player may have been

erased or deleted. Follow the "Pairing" instructions in this manual to re-pair and reconnect the devices.

Turn off any other Bluetooth devices that are not being used to reduce external interference.

4. Some Functions Do Not Work

Your specific model of smartphone may not support some of the functions described in this manual.

Refer to the manual supplied with your phone for further information.

Care and Maintenance

Always remember to turn your headphones off if they will not be used for a long period of time. Do

not expose your headphones to extremely hot or cold temperatures for extended periods. Do not

expose them to direct sunlight or leave them in places such as the dashboard of your car on a hot

day. Prevent water or any other liquids from entering the cabinets of your headphones.

Protect Your Hearing

Using these, or any headphones at high volume levels for long periods can result in permanent hearing

damage. Always start listening with volume controls on your headphones and your paired smartphone

or music player at a low level and then gradually increase the volume controls to a comfortable listening level.

Important Notes

•

It is dangerous and illegal (in some jurisdictions) to use headphones when you are driving a car, riding a

bike or motorcycle, or operating a watercraft. Be aware of local laws and regulations.

•

Do not use these headphones in situations where they might cause distractions or prevent you from

hearing warning sounds.

•

There are no user serviceable parts in these headphones. Do not attempt any service or repairs on your

own. Refer to the warranty for service, repair or replacement information.

Bluetooth technology is incorporated under license from Bluetooth SIG Inc.

Action Required

When headphones are "Off" press and hold the MFB inward for 3 seconds until you

hear the "Power On" voice prompt.

Press and hold the MFB for 5 seconds until your hear the "Power Off" prompt and LED

indicator shuts off

When headphones are "Off" press and hold the MFB inward for 7 seconds until you

hear the "Pairing" voice prompt. The LED indicator flashes blue and red rapidly.

Make sure your Bluetooth device is "On" and in the Pairing Model. When ekid-B90

appears on your devices menu, select it to complete pairing.

In pairing mode, press and hold the "+" button for 5 seconds to reset headphone and

enter pairing mode again.

Short press the MFB to start playback. Short press to pause playback.

Short press to resume playback.

Press the >> button during playback

Press the << button playback

Press and hold the "+" button during playback

Press and hold the " - " button during playback

Short press the MFB when you hear the incoming ring sound. NOTE: Music will

automatically pause when you are answering a call and resume when you end the call.

Short press the MFB to end the call and "hang up".

Press and hold the "MFB" button for 2 seconds

Bluetooth is a registered trademarks of Bluetooth SIG Inc.