Canon imageCLASS D1120 Посібник користувача - Сторінка 16
Переглянути онлайн або завантажити pdf Посібник користувача для Принтер "Все в одному Canon imageCLASS D1120. Canon imageCLASS D1120 36 сторінок. Canon imageclass d1120: user guide
Друкувати сторінку
3 Make Fax Settings (D1180/D1170/D1150 Only)
The receive mode determines how the machine responds to incoming faxes and voice calls. Select the mode that
most suits your needs from the chart below. For details about the receive modes, see "About the Receive Modes, "
on p. 13.
–
The remote reception function is useful when the receive mode is set to <Manual> and your machine is connected to an external
telephone. You can receive faxes by picking up the external telephone and pressing a two-digit remote reception ID (the default
setting is 25). For details, see "Fax, " in the e-Manual and Chapter 6, "Fax (D1180/D1170/D1150), " in the Basic Operation Guide.
–
Your telephone with built-in answering machine or answering machine must be connected directly to the machine to use
<AnsMode>. Make sure that the auto answering function of the telephone with built-in answering machine or answering machine is
activated. (See "Connect Telephone Cables, " on p. 8.)
–
The external telephone must be connected to the machine to use <FaxTel> or <Manual>. (See "Connect Telephone Cables, " on p. 8.)
–
By default, <FaxOnly> is selected in <1. RX MODE>. If an external telephone is connected to the machine and receives a fax or voice
call, the external telephone rings. You can answer voice calls while the external telephone is ringing.
–
To disable the incoming ring, press
<4. INCOMING RING>, then select <OFF>.
–
Voice mail is not supported with <AnsMode>.
–
DRPD (Distinctive Ring Pattern Detection) service assigns two or more telephone numbers with distinctive ring patterns to a single
telephone line, allowing you to have both a fax number(s) and a telephone number(s), using only one telephone line. Your machine
automatically monitors incoming calls and the ring pattern, to let you know if the call is a fax or voice call. Set the ring patterns
assigned by your telephone company for a fax or voice call. Contact your telephone company for information on availability.
The display returns to the standby mode:
●
The machine may enter the standby mode (Auto Clear function) while you are
setting it up. Make the setting again from the main menu.
The display turned OFF:
●
The machine may enter the Sleep mode while you are performing setup. Press
[Energy Saver] to turn the display back ON and continue the setup.
1
Press
[Menu].
2
Press
or
to select <4. TX/RX
SETTINGS>, then press [OK].
M E N U
4 . T X / R X
3
Press
or
to select <3. FAX SETTINGS>,
then press [OK].
T X / R X
S E T T I N G S
3 . F A X
S E T T I N G S
14
[Menu] → <4. TX/RX SETTINGS> → <3. FAX SETTINGS> → <4. RX SETTINGS> →
S E T T I N G S
4
Press
or
to select <1. RX MODE>, then
press [OK].
F A X
S E T T I N G S
1 . R X
M O D E
5
Press
or
to select the receive mode,
then press [OK].
R X
M O D E
6
Press
[Stop/Reset] to return to the standby
mode.
F a x O n l y