Ekinex EK-EB2-TP Посібник - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник для Блок управління Ekinex EK-EB2-TP. Ekinex EK-EB2-TP 4 сторінки. Pushbutton 6-fold

Друкувати сторінку

Number

Product

and type of

code

rockers

EK-EB2-TP

6 square

Customization of rockers

The rockers can be customized with symbols and texts,

for more information see the standard library on the eki-

nex

catalog or the website www.ekinex.com. On request

it is also possible a customization with symbols and texts

chosen by the customer.

Protection for construction site

A protection for construction site is included in the delivery

of the device. The protection is made of thermoformed

transparent plastic and avoids the dirtying of the device

caused by the painting of the walls. Two reliefs in corre-

spondence of each rocker allow the operation of the chan-

nel also when the protection is applied on the pushbutton.

If necessary the protection for construction site can be

ordered separately with the code given in the table.

Product

Rockers

code

EK-EB2-TP

6 square

Mounting

The device has degree of protection IP20, and is therefo-

re suitable for use in dry interior rooms. The installation of

the device requires the following steps:

a) fix the metallic support (5) with the screws supplied

(6) on the wall box (7) provided with suitable fixing holes;

b) snap a rectangular frame (2) of the form or flank series,

inserting it from the rear of the device (4);

c) enter the bus terminal, previously connected to the bus

cable in its slot on the rear side (see also: "Connection

of the KNX bus line"). At this point it is recommended to

carry out the commissioning of the device (see also "Con-

figuration and commissioning") or at least the download

of the physical address;

d) mounting the device on the metallic support supplied

(5) with the screws (3). The correct mounting of the de-

vice occurs when the bus terminal is located in the lower

part; for mounting the device follow also the indication

TOP (arrow tip pointing up) on the rear side of the device.

e) snap the six rockers (1) on the device.

The 6-channel pushbutton can be mounted on a round,

a square or a rectangular wall flush mounting box. If ne-

cessary, the metallic support for mounting on the wall box

can also be ordered separately using the code shown in

the table.

Modularity of

Frame

rockers

rectangular, form

40x40 mm

or flank series

Construction site

protection

EK-PPR

1) Rockers (to be ordered separately)

2) Frame of the series form or flank (to be ordered separately)

3) Screws to fasten the pushbutton on the metallic support

4) Pushbutton 6 channels

5) Metallic support for mounting wall box

6) Screws for fixing the support on the wall box

7) Wall box

Product

Wall flush

code

mounting box

EK-EB2-TP

round / rectangular

Switching, display and connection elements

The device is equipped with mechanisms for switching, 2

LEDs for each channel, a programming LED and a pro-

gramming pushbutton and a terminal block for connection

of the bus line.

1) Programming LED

2) Programming pushbutton

3) Connection terminal block for KNX bus line

4) Seat for mounting the rocker

5) Light guide for LED

Switching elements

• Pushbutton (2) for switching between the normal and

programming operating mode

• Mechanisms (4) for independent switching of single or

group of loads (to be completed with square rockers)

Dist. between

Support

fixing holes [mm]

60 / 85 mm

EK-SMR