American Time SiteSync IQ Посібник з монтажу та експлуатації - Сторінка 4

Introduction

The SiteSync IQ Wireless Controller provides synchronized control of secondary system clocks and electrical circuits such as

those for controlling signaling devices and lights. Synchronization and event programming are achieved wirelessly from a SiteSync

IQ Wireless System Controller. Manual control of signal circuits is achieved wirelessly via commands from a SiteSync IQ Wireless

System Controller (keypad or Remote Connect Web Interface) or via panel switches on the front of the Wireless Controller.

SiteSync IQ Wireless Controller Standard Features

• Power switch

• Power On indication LED

• Wall mounting hanger (molded into enclosure)

• Knock out wiring compartment

• Screw terminal main power input and relay contacts

• Relay surge suppression on/off switches

• Removable relay contact fuses

• Removable main power fuse

• Relay status indicator LEDs

• Manual control of signal circuits

• Flexible control of four signal circuits

SiteSync IQ Wireless Controller Specifications

• Dimensions: .........................8

• Weight: ................................4 lbs.

• Power: ..................................120vac hard-wired

• Operating temperature: .......41° to 131° degrees F

• Humidity: .............................0% - 95% Non-condensing

• Dry contacts: .......................10A 240v (resistive), optional 15A (resistive) 240v (socketed) clock only

• Receiver frequency: ............450-470 MHz (factory set)

• Paging format: .....................POCSAG, Narrow band

• Data baud rate: ...................512 BPS

• Receiver sensitivity: .............10uV/M

• Channel spacing: ................12.5 KHz

"h x 10

"w x 5"d

SiteSync IQ Wireless Controller

Installation Manual