Astera AL7-W-Series Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Прожектор Astera AL7-W-Series. Astera AL7-W-Series 18 сторінок. Water-resistant spotlamp
Друкувати сторінку6
Settings of the MENU
Hold the first key for 1 second to enter the menu. When in the menu, use the 4 buttons to
navigate through the menu. While the system is waiting for a selection you cannot go up
one level.
INPUT SELECT
XLR DMX
The unit uses the input signal of the XLR connector socket
WIRELESS DMX
The unit uses the RF signal sent by the Wireless DMX Transmitter ART3
REMOTE CONTROL
The unit uses the RF signal sent by the ARC2 Remote Control
STANDALONE
The unit ignores all incoming signals and can only be operated through its
control panel
AUTO
The unit operates in auto mode and chooses any incoming signal
AUTO SETTING
PROGRAM
Chooses one of 20 pre-defined programs that can be customized with
colors, intensity, power scheme, speed, fade, directions, etc.
INTENSITY
Sets the brightness of the LEDs
SPEED
Sets the speed of the programs
FADE
Sets the Fade between program steps
DIRECTION
Adjusts direction and looping of programs
FFW+LOOP
Programs run in normal (forward) direction, when a program is finished,
it starts again
REV+LOOP
Programs run in reversed direction, when a program is finished,
It starts again.
FWD
Programs run in normal (forward) direction, when a program is finished,
execution is stopped
11