ASTi Sound+Sleep ASM1002 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Засоби особистої гігієни ASTi Sound+Sleep ASM1002. ASTi Sound+Sleep ASM1002 12 сторінок. Adaptive sound sleep therapy system
Також для ASTi Sound+Sleep ASM1002: Посібник користувача (12 сторінок), Посібник користувача (8 сторінок)
Друкувати сторінку
Getting Started
Unpack
the box which contains:
1.
Adaptive Sound Sleep
Therapy System
2.
Power Adapter
3.
User Manual (this document)
Connect Power
The power jack is located on the bottom of the Adaptive Sound
Sleep Therapy System
Slip the cord under the rubber foot by separating the two pieces of
the foot along the slit. The machine should sit flat on a table or
nightstand if the cord is installed correctly. Next, connect the AC
plug into an un-switched wall outlet. The system may take up to 20
seconds to initialize. Please note the ten orange dots around the
Dial do not light up. The Power Adapter can be used internationally
with any AC line voltage from 100 – 240 Volts, 50 or 60 Hz.
Turn on the Sleep Therapy System
and the unit will start playing immediately. The unit may be turned
Off with the Power button, or the Sleep Timer button (see page 7).
Note: Out of the box the unit starts in Adaptive Mode with High
Richness (explained in the next section). After that the unit will
retain the last settings used when you last powered it off using the
Power button. If you power it off by unplugging the Power Adapter
from the wall outlet (not recommended) the settings are not saved.
Rotate the Dial
with the Up/Down buttons.
Power
On/Off
SoundStories
®
®
. Push the power supply plug into the jack.
to select a SoundStory, and adjust the Volume
POWER
DISPLAY
TIMER
30 60 90 120
TRAIN
MEADOW
OCEAN
FIREPLACE
WATERFALL
ADAPTIVE
4
Press the Power button
VOLUME
+
–
CITY
RAINFALL
BROOK
MEDITATION
WHITE NOISE
RICHNESS
Volume
Up
Down