Astivita DRV7KGWH Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Сушарка Astivita DRV7KGWH. Astivita DRV7KGWH 10 сторінок.

INSTALLATION

Top board

Control panel

Door

Filter

Front vent flange

(only to front vent)

Installation

•

Dryer should be placed in a ventilated area with

not less than 10cm distance from the wall. It is suggested

there are no obstacles within 1.5m in front of dryer and

keep ventilated.

Side panel

Tumble Door

Switch

Power plug

Flexible duct

(only to back vent)

Front panel

>10cm

INSTALLATION

•

Horizontal adjustment:

Tie a heavy subject on the string on the front and two sides of the dryer.

Please refer this to below figure, and if A=A, B=B, this means the dryer is placed

horizontally.

While the opposite, you could place something on the dryer.

Note!

if dryer could not be placed horizontally (the lean angle is no more than 2°,

the dryer will work unbalanced or stop working sometimes.

Notice when installing:

• Do not install the dryer in the open air or place easily

damaged by rain;

• Do not place the back of dryer near curtain or something

in the wind;

• Do not place the dryer near gas or flammable area.

•

Flex tube fixing

(only to back vent)

• Connect one end of flex tube with whorl to the back vent, then fix it deasilly till tight.

• The other end of flex tube will be extended to outdoor,

please refer the right assemble way to the below pictures.