Astonica 50105346 Інструкція з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Внутрішнє оздоблення приміщень Astonica 50105346. Astonica 50105346 2 сторінки. Alannah 5-pc patio set

Друкувати сторінку
PARTS & HARDWARE LIST
PART #
A
Table top
B
Lower Support
C
Table Leg
D
Plastic Spanner
E
Medium Hex Nut
F
Small Hex Nut
A
B
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
NOTE: This product is intended for residential, non-commercial use.
DESCRIPTION
D
E
C
1
QUANTITY
CAUTION: Do not over tighten fasteners.
1
1. (SEE FIGURE 1) Place one leg (C) upside
1
down on a flat non-scratching surface.
4
Place lower support (B) in leg notch with
1
threaded stud.
Secure with small hex nut (F).
8
Leave the small hex nuts finger tight.
4
Repeat step one with other three legs.
2. (SEE FIGURE 2) Place table top (A) upside
down on a flat non-scratching surface.
3. Position legs (C) and lower support (B)
assembly over the table studs.
4. Secure the legs with medium hex nuts (F).
Make sure the hex nuts are finger tight.
F
5. (SEE FIGURE 3) Turn table upright.
6. Using spanner (D) tighten table top (A
first followed by lower support (B).
7. Tighten until the hex nuts are snug.
ASSEMBLY INSTRUCTIONS
Figure 1
Figure 2
E
A
Figure 3
D
2
B
C
F
C
Table Support Studs