Astonica 40100047 Інструкція з експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Камін на відкритому повітрі Astonica 40100047. Astonica 40100047 3 сторінки.

Друкувати сторінку
HARDWARE LIST
PART #
DESCRIPTION
1
Round Head Bolts
2
Nuts
3
Spring Washers
4
Wrench
1
2
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
CAUTION
• Do not use liquid fire starter, charcoal lighter fluid or any other combustible liquid to start the
fire. Use natural kindling or store bought solid fire starters. Use small quantities of dry
hardwood only.
• Read and follow all safety instructions specified by the manufacturer of the charcoal and/or fire
starters you are using.
WARNING: PRACTICE FIRE SAFETY AT ALL TIMES
1. USE WITH ADULT SUPERVISION ONLY. KEEP OUT OF THE REACH OF CHILDREN.
2. DO NOT LEAVE UNATTENDED WHILE BURNING OR SMOLDERING.
3. ALWAYS EXTINGUISH FIRE COMPLETELY WHEN NOT SUPERVISED, OR BEFORE MOVING.
4. DO NOT PLACE NEAR FLAMMABLE OR COMBUSTIBLE MATERIALS WHEN BURNING.
5. OUTDOOR USE ONLY. DO NOT USE IN AN ENCLOSED OR POORLY VENTILATED AREA, BURNING
FIRES PRODUCE CARBON MONOXIDE AN ODORLESS, COLORLESS GAS THAT CAN CAUSE DEATH
WHEN INHALED.
6. KEEP AWAY FROM OVERHANGS, TREES, GAZEBOS, TENTS AND OTHER OUTDOOR STRUCTURES.
7. DO NOT USE ON BALCONIES OR WOOD DECKS.
8. KEEP A FIRE EXTINGUISHER WITHIN REACH AT ALL TIMES
9. TAKE CARE NEVER TO TOUCH METAL SURFACES AFTER A FIRE HAS BEEN LIT. ALLOW ADEQUATE
TIME FOR UNIT TO COOL AFTER FIRE IS OUT. THEN WEAR INSULATED SAFETY GLOVES TO
PROTECT YOURSELF.
QUANTITY
3
4
2
8
1. (SEE FIGURE 1) Insert round head bolt (1) into
the holes at the bottom of back panel (H) then
8
the holes at the edge of base (A), secure with
8
spring washer (3) and nuts (2). Insert round
1
head bolt (1) into the holes at the bottom of
door frame (F) then the holes at the edge of
base (A), secure with spring washer (3) and
nut (2).
2. (SEE FIGURE 2) Slide in the side panels (G)
to the side edge of door frame (F) and Back
panel (H).
3. (SEE FIGURE 3) Place the ashtray (B) inside
the firepit. Place the grate (C) on top of the
ashtray (B).
ASSEMBLY INSTRUCTIONS
FIGURE 1
H
F
A
FIGURE 2
F
FIGURE 3
B
3
1
3
2
H
G
C