Door Knox VDP103 Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Домофонна система Door Knox VDP103. Door Knox VDP103 15 сторінок.

VDP103

2.3

Admin Cards

Instead of entering the admin mode using the PIN, cards or fobs can be used to add or delete

cards.

2 cards or fobs are required one for the Add card or fob and one for the Delete card or fob.

In admin mode:-

Press 6# swipe add card or fob (double beep) swipe delete card or fob (double beep).

2.4

The Entry Pin will allow access regardless of the unlock mode that the VDP is set to.

In admin mode:-

Press 011#nnnnnn# (single beep) nnnnnn# (double beep)

Note: nnnnnn = new 6 digit PIN.

2.5

Adding using the Add Card

2.5.1

Adding using the Admin Pin

In admin mode:-

Press 1nnn#(single beep) swipe card or fob (double beep).

To add multiple cards do not press 1 again just enter nnn# (single beep) swipe card or fob

(double beep).

4 beeps indicates that it has failed.

Don't forget if the unlock mode is set to card or fob and PIN then a PIN will have to be added

for each card or fob. The user can do this themselves as this is not done in admin mode. See

Adding a PIN to a Card or Fob

Note: nnn = User No. between 001 and 199.

If a record is kept of the user and the User No. then the card or fob can be deleted using the

user No. else the card or fob will be needed to delete it from the VDP103.

This is a handy way to remove lost cards or fobs from the system without having to delete

them all.