Doorentryonline SR2 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Зчитувач карток Doorentryonline SR2. Doorentryonline SR2 12 сторінок. Proximity & wiegand card reader with remote control
Друкувати сторінку
Connection to standard Wiegand controller or PC access control system AC8001/2
Set Operation Mode – Stand-alone or Wiegand (Default is stand-alone)
Programming Step
1. Enter Program Mode
2. Stand-alone Operation
3. Wiegand Reader Operation
4. Exit Program Mode
User data transfer connection (1 x power supply and 9 x SR2 units)
Set User Data Transfer
Programming Step
1. Enter Program Mode
2. Set Transfer Data on the first SR2
For all 1000 users, this will take 3 minutes
3. Exit Program Mode
Remote Control Operation
* (Master Code) #
72 # is factory default for stand-alone
73 #
*
Remote Control Operation
* (Master Code) #
96 #
Within 3 minutes the green LED will shine, after 1 x bleep
the LED will turn red to confirm data transfer
*