Acer XZ240QP Посібник користувача - Сторінка 27
Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Acer XZ240QP. Acer XZ240QP 32 сторінки.
Друкувати сторінку
Adjusting the System
1.
Press the MENU key to open the OSD.
2.
Using the Navi/OK button, select System from the OSD. Then navigate to
the setting you wish to adjust.
3.
Use the Navi/OK button to select the setting.
4.
Input: Select the source from an available input source.
5.
Auto Source: Automatically searches for available input sources.
6.
DP Format: You can select which DP format you are using. The default is
set at DP1.4.
7.
Wide Mode: You can select which screen aspect you are using. The
options are Full, Aspect and 1:1.
8.
DDC/CI: Allows the monitor settings to be set through the software on
the PC.
Note: DDC/CI, short for Display Data Channel/Command Interface,
which allows monitor controls to be sent via software.
9.
HDMI Black Level: You can select the level of blackness under HDMI
source. The options are Normal and Low.
10. Quick Start Mode: Enable monitor rapidly.
EN-17