DoorHan SHAFT-20 Посібник з монтажу та експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Відкривач воріт DoorHan SHAFT-20. DoorHan SHAFT-20 12 сторінок.
Друкувати сторінку5. ADJUSTMENT OF EXTREME POSITIONS
5.1. CLOSED POSITION
•
Make sure, that the operator is fixed rigidly; put the door in completely closed position.
•
Move a ring for extreme position installation (pos. 1) so that a screw (pos. 2) would press the upper microswitch
(pos. 3). See Figure 4.
•
Open and close the door, make sure, that the screw presses the microswitch and DL3 indicator on the control
unit is off.
2
3
5.2. OPEN POSITION
•
Make sure, that the operator is fixed rigidly, put the door in completely open position.
•
Move a ring for extreme position installation (pos. 1) so that a screw (pos. 2) would press the lower microswitch
(pos. 3). See Figure 5.
•
Close and open the door, make sure, that the screw presses the microswitch and DL2 indicator on the control
unit is off.
3
2
8
ADJUSTMENT OF EXTREME POSITIONS
Figure 4
Figure 5
1
1