DoorHan DCUH-2 Посібник - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник для Блок управління DoorHan DCUH-2. DoorHan DCUH-2 12 сторінок. Control unit for electrohydraulic dock leveler with hinged lip
Також для DoorHan DCUH-2: Посібник користувача (16 сторінок)
Друкувати сторінку
5. MOUNTING
Recomended height of control unit mounting
Fasteners choosen depending on the type of wall.
6. PROGRAMMING
6.1. DIP SWITCHES
Dip switches are used for choosing of control unit mode. Switching must be done on de-energized system. ATTENTION! Before
first time use, make sure that the DIP switches 1 and 2 are in the correct positions.
Dip 3 is used for call of extended menu
Dip 3 = Off (Main menu)
Dip 3 = On (Extended menu)
"DCUH-2 mode corresponds to the display «dH2»."
«In DCUH-2 mode each operation with dockleveler or the door corresponds to the display (Table. 1.1).»
COMMAND GROUP
DL
«In DCUH-3 mode each operation with dockleveler or the door corresponds to the display (Table. 1.2).»
COMMAND GROUP
Door
Dockleveller
1...1,5 m
DCUH-2 MODE
Dip 1 = Off
Dip 2 = Off
Dip 4 not in use
Dip 3 is used for call of extended menu
"DCUH-3 mode corresponds to the display «dH3»."
INDICATION
«PUP»
«Pdn»
INDICATION
«GUP»
«Gdn»
«Gst»
«PUP»
«Pdn»
PROGRAMMING
Fix points
DCUH-3 MODE
Dip 1 = Off
Dip 2 = On
Dip 3 = Off (Main menu)
Dip 3 = On (Extended menu)
Dip 4 not in use
DESCRIPTION
DL rising
DL lowering
DESCRIPTION
Door opening
Door closing
Door stop
Dl rising
DL lowering
7