Dabir Surfaces C2-100 Series Посібник з швидкого налаштування - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Контролер Dabir Surfaces C2-100 Series. Dabir Surfaces C2-100 Series 2 сторінки.

Друкувати сторінку

Quick Set-Up Guide - Continued

System Installation - Surface Connections

11. Insert Surface connector as shown.

12. Listen for an insertion "CLICK" to confirm proper connection.

NOTE: Therapy will start automatically if powered "ON".

Controller Operation: "ON", "OFF" and "PAUSE" Mode

13. POWER "ON": Touch and hold the "POWER" key until the "START-UP"

screen appears. Therapy will automatically begin if a Surface is connected.

14. POWER "OFF": Touch and hold the "POWER"

key until the "OPTIONS" Menu appears. Select

"SHUTDOWN" by touching "POWER" key for 2

seconds.

15. "PAUSE" MODE: Touch and hold the "POWER"

key until the "OPTIONS" screen appears, then

select "PAUSE" to temporarily stop therapy.

(Default is 30 minutes.) Select "RESUME" at

anytime to immediately resume therapy.

16. "KEY LOCK" MODE "ON" / "OFF": Touch and hold the "SELECT" key

for 4 seconds to "LOCK" display. (Yellow lock symbol will appear.)

Touch and hold the "SELECT" key for another 4 seconds to

"UNLOCK" the display. (Yellow lock symbol will disappear.)

Getting familiar with the Controller User Interface:

"MICROCLIMATE"

Feature NOT available

at this time

"MICROPRESSURE"

"LOW" and "HIGH"

alternating cycle speeds

NOTE: For C2-1002 Models, the User Interface has been simplified. To change cycle speed, press the "DOWN" key

WARNINGS / CAUTIONS:

•

Therapy is NOT provided unless the Controller is powered "ON" and the Surface is actively cycling.

Corporate Headquarters, Sales & Manufacturing:

Dabir Surfaces, Inc., 7447 West Wilson Ave., Harwood Heights, IL 60706, USA, www.dabir-surfaces.com

Sales Inquiries:

[email protected], Tel: +1(888)559-3641

Technical Support:

[email protected], Tel: +1(888)559-3642

PATENT:

www.dabir-surfaces.com/patents

DOC# R02-0006-00014-DA

RESUME

SHUTDOWN

(Hold 2 seconds)

SELECT OPTION

PAUSE

RESUME

SYSTEM PAUSED

RESUME IN XX:XX MINUTES

SURFACE

HIGH

CYCLE

933

SPEED

HRS

LOW

MICROPRESSURE

Surface

Connector

STEPS 11 & 12: Connector Insertion

SW vXXX.X.XX

STEP 13: Power Controller "ON"

"POWER"

"ON", "OFF" and "PAUSE"

75%

"SELECT"

"MENU" confirmation and

"KEY LOCK" mode

933

HRS

System Starting