Canon PIXMA MP520 Почніть звідси. - Сторінка 2

Переглянути онлайн або завантажити pdf Почніть звідси. для Принтер "Все в одному Canon PIXMA MP520. Canon PIXMA MP520 2 сторінки. All-in-one inkjet printer
Також для Canon PIXMA MP520: Додатковий посібник (6 сторінок), Брошура та технічні характеристики (2 сторінок), Посібник із швидкого старту (2 сторінок)

Друкувати сторінку

Windows

Software Installation

Note

•

The screens below refer to Windows Vista™ operating system Ultimate Edition

(hereafter referred to as "Windows Vista") installation.

Screens may vary depending on the operating system you are using.

•

Log into a user account with the administrator privilege.

•

Before installing the driver, disable all anti-virus programs and automatically loading

programs.

•

A message asking for your confirmation to restart your computer may appear

during the installation process. If this message is displayed, follow the on-screen

instructions and click OK.

The installation resumes from where it left off when your computer has been

restarted.

•

If the computer is restarted during installation, do not remove the Setup CD-ROM

during restarting.

Be sure to TURN THE MACHINE OFF before continuing.

(1) Press the ON/OFF button.

(2) Make sure that the Power lamp stops flashing.

Turn the computer on and start Windows.

Important

If the Found New Hardware or Found New Hardware Wizard screen appears

automatically, remove the USB cable connected to your computer. Click Cancel

to quit the screen. In Windows Vista, the screen may close automatically when

the USB cable is unplugged. Then turn off the machine and proceed from step

c to install the MP Drivers.

Insert the Setup CD-ROM. The setup program should run

automatically.

In Windows Vista, go to Step d. In Windows XP and Windows 2000, go to

Step f.

If the AutoPlay screen appears, click Run Msetup4.exe.

If the User Account Control screen appears, click Continue.

If the same screen reappears in subsequent steps, click

Continue.

When the main menu appears, click Easy Install.

The MP Drivers, On-screen Manuals, and application software are installed

automatically.

Note

If you want to select particular items to install, click Custom Install and follow the on-

screen instructions to proceed the installation.

Part no. QT5-1093-V02 © 2007 Canon Inc. "Microsoft" is a registered trademark of Microsoft Corporation. "Windows" is a trademark of Microsoft Corporation, registered in the U.S. and other countries. "Windows Vista" is a trademark of Microsoft Corporation. "Macintosh" and "Mac" are trademarks of Apple Inc., registered in the U.S. and other countries.

When the list of applications to install appears, confirm the

contents, click Install.

Note

Move the cursor over items to display explanations of each application.

Read the License Agreement carefully and click Yes. The

software installation screen may appear during the installation

process. Follow the on-screen instructions to install the

software.

When the Printer Connection screen appears, connect

one end of the USB cable to the computer, the other to the

machine, then TURN THE MACHINE ON. The software will

begin identifying the printer port being used.

Important

If you cannot go to the next procedure after three minutes, refer to "Trouble-

shooting" instructions in the Quick Start Guide.

USB

To Computer

When the Setup Complete screen appears, click Next.

When the User Registration screen appears, click Next.

Note

To register later, click Cancel and go to Step l. After software installation is complete,

double-click

on the desktop.

Follow the on-screen instructions to register your product. You will need your

product serial number, which is located on the inside of the machine. See

Step 1-

on the front page.

When the PIXMA Extended Survey Program screen

appears, confirm the message. We would appreciate it if you

would take part in this program regarding the use of Canon

printers. If you can agree, click Agree.

When the Installation completed successfully screen

appears, click Exit.

After clicking Exit, remove the CD-ROM.

If Restart is displayed, make sure that the Restart the system now

(recommended) check box is selected, then click Restart.

Remove the CD-ROM after clicking Restart and restarting the computer.

Important

When printing for the first or second time after setup, the print will take a minute

or two before it becomes ready to print.

Note

Keep the CD-ROM in a safe place in case you need to reinstall the software.

Software installation is now complete.

Macintosh

Software Installation

Note

•

Since Mac

OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or earlier

are not supported, do not connect the machine to these.

•

The screens below refer to Mac OS X v.10.4.x installation. Screens may vary

depending on the operating system you are using.

•

Log on as an Administrator.

•

Before installing the driver, disable all anti-virus programs and automatically loading

programs.

Connect one end of the USB cable to the computer, the other

to the machine.

Note

Make sure the machine is turned on.

USB

Turn on your Mac and insert the Setup CD-ROM.

Note

If the CD-ROM folder does not open automatically, double-click the CD-ROM icon

→

on the desktop.

Double-click the Setup icon.

When the Authenticate screen appears, enter your

administrator name and password. Click OK.

If you do not know your administrator name or password, click

, then follow the on-screen instructions.

When the main menu appears, click Easy Install.

The MP Drivers, On-screen Manuals, and application software are installed

automatically.

Note

If you want to select particular items to install, click Custom Install and follow the on-

screen instructions to proceed the installation.

When the list of applications to install appears, confirm the

contents, then click Install.

Note

Move the cursor over items to display explanations of each application.

Read the License Agreement carefully and click Yes. The

software installation screen may appear during the installation

process. Follow the on-screen instructions to install the

software.

When the Setup Complete screen appears, click Next.

When the User Registration screen appears, click Next.

Note

To register later, click Cancel and go to Step j. After software installation is complete,

double-click

on the desktop.

Follow the on-screen instructions to register your product. You will need your

product serial number, which is located on the inside of the machine. See

Step 1-

on the front page.

When the Installation completed successfully screen

appears, click Restart.

Remove the CD-ROM after clicking Restart and restarting the computer.

Note

Keep the CD-ROM in a safe place in case you need to reinstall the software.

The system is restarted automatically.

When using Mac OS X v.10.2.8 to v.10.3.3:

Restarting the computer while connected to the machine may cause the

machine not to be detected. To resolve this, either unplug the USB cable

then plug it back in again, or turn the machine off then back on again.

Important

When printing for the first or second time after setup, the print will take a minute

or two before it becomes ready to print.

Note

When using Mac OS X v.10.2.8 to v.10.3.x, before using the Operation Panel on

the machine to save originals scanned from the Platen Glass to the computer, it is

necessary to select MP Navigator EX as the launch application on Image Capture

under Applications. For details, refer to "Scanning Images" in the User's Guide on-

screen manual.

Software installation is now complete.

XXXXXXXX

PRINTED IN THAILAND