DAC RA711-GSM Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Телефон DAC RA711-GSM. DAC RA711-GSM 12 сторінок.

Quick Start Guide

1. Unpack telephone, you have been supplied with:

Ÿ RA711-GSM Telephone

Ÿ Mains power pack 12V DC 2A (optional)

Ÿ GSM Antenna (optional)

2. Insert valid SIM card into telephone SIM holder

3. Connect antenna ensuring instructions are followed on page 3 [Electrical connection]

4. Connect power supply [telephone will take up to 3 minutes to initially connect to network,

however this normally occurs in less than 60 seconds]

5. At this stage you can call the telephone [telephone number determined by SIM card], however

the telephone will not dial out until a number is stored in the internal memory.

6. If required, store a number in the internal memory by utilising the CVC [Configure Voice Call]

command. Send a text message to the telephone as follows:

CVC1234.+44XXXXXXXXX

Ensure you send text message with full stop and country code [as

written here] followed by valid telephone number

You will receive a message back from the telephone confirming that you have configured

the voice call number.

When the telephone is operated [call button is pressed] it will now dial the telephone number you

have stored in the memory.