DoorKing MicroCLIK 8057 Series Посібник - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник для Приймач DoorKing MicroCLIK 8057 Series. DoorKing MicroCLIK 8057 Series 3 сторінки. Rf receiver

Друкувати сторінку
Programming Continued
Program Transmitter Codes One at a Time:
1. Press
1
0
and the four-digit Master Code.
2. Enter the five-digit transmitter code, then press
3. Repeat step 2 to enter additional transmitter codes.
4. Press
0
TOGETHER to end programming.
Program a Group of Transmitter Codes :
1. Press
1
1
and the four-digit Master Code.
2. Enter the five-digit transmitter code for the LOWEST number transmitter in the group, then press
3. Enter the five-digit transmitter code for the HIGHEST number transmitter in the group, then press
4. A long tone will be heard when programming is complete.
Delete Transmitter Codes One at a Time:
1
2
1. Press
and the four-digit Master Code.
2. Enter the five-digit transmitter code to be deleted, then press
3. Repeat step 2 to delete additional transmitter codes.
0
4. Press
TOGETHER to end programming.
Delete ALL Transmitter Codes at Once:
1. Press
1
3
and the four-digit Master Code.
2. Enter 9999, then press
3. After approximately 25 seconds, a long
This device complies with the FCC Rules Part 15. Operation is subject to the following two conditions:
1.) This device may not cause harmful interference.
2.) This device must accept and interference received, including interference that may cause undesired operation.
This class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.
8057-065-H-10-14
The five-digit unique code is located on the back of the transmitter (Tr).
"BEEP"
"BEEP"
"BEEEEEEEEEP"
The five-digit unique codes are located on back of the transmitters (In numeric sequence).
"BEEP"
The five-digit unique code is located on the back of the transmitter.
"BEEP"
"BEEEEEEEEEP"
WARNING: Deleted codes CANNOT be retrieved.
"BEEP"
"BEEP"
"BEEEEEEEEEP"
will be heard to end programming.
Copyright 2014 DoorKing, Inc. All rights reserved.
"BEEEEEEEEEP"
"BEEP"
"BEEP"
"BEEP"
120 S. Glasgow Avenue
Inglewood, California 90301
U.S.A.