DoorKing 1601 Series Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Автоматичні шлагбауми DoorKing 1601 Series. DoorKing 1601 Series 8 сторінок. Break-away octagon arm installation kit
Також для DoorKing 1601 Series: Посібник (5 сторінок), Посібник з монтажу (11 сторінок)
14 FT 2-PIECE OCTAGON ARM ASSEMBLY
This kit is designed for use on a 1601 or 1603 barrier gate operators ONLY. It has 2-7 ft arm sections
that assemble into a 14 ft arm.
Assemble Arm
7 F
t A
r m
S e
c t i o
n w
i t h
C o
u p
l e r
i n s
t a l l
e d
Drawing NOT to scale
1601-269-D-2-20
C o
u p
l e r
Install End Cap
Push a screwdriver through the hole in cap to
release spring while pushing cap on. Keep pushing
cap on until a "CLICK" is heard, locking it in place.
Slide section of the arm on coupler and secure with screws.
Note: Holes are pre-drilled in the arm section, but not in the coupler.
Self-tapping screw
Self-tapping screw
7
DoorKing Part Number
1601-567
14 Ft 2-Piece Octagon Arm Kit
7 F
t A
r m
S e
c t i o
n
120 S. Glasgow Avenue
Inglewood, California 90301
U.S.A.