DoorKing 1601-295 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Автоматичні шлагбауми DoorKing 1601-295. DoorKing 1601-295 8 сторінок. Break-away octagon arm installation kit
Також для DoorKing 1601-295: Посібник з монтажу (11 сторінок)

Друкувати сторінку

Plug in Break-Away Switch (REQUIRED) and Reverse Edge (Optional)

Option #1

Reverse Edge Plug (Optional)

Secure ALL Wires to

Bracket and Install Cover

Note for Older Covers:

See page 6.

Zip Tie

1601-269-D-2-20

Break-Away Switch Plugs

(Required)

Option #1

IMPORTANT:

Allow for some slack in the reverse

edge wire to account for the arm pivoting when arm

"Breaks Away" from bracket. Test break-away

feature to make sure there is enough slack wire.

Note: The reverse edge plug is not used

when not installing a reverse edge.

Break-Away Switch (REQUIRED)

IMPORTANT: Break-Away switch is located between the

release rollers and MUST be connected to wire harness.

DO NOT OPERATE ARM WITHOUT

BREAK-AWAY SWITCH FUNCTIONING.

IMPORTANT:

Make sure that all wires remain clear of

the pivoting arm and the plastic cover.

Zip Tie

Option #2

Break-Away Switch Plugs (Required)

Reverse Edge Plug (Optional)

Use included zip ties to secure ALL

wires to break-away arm bracket.

Option #2

Allow for some slack in the

reverse edge wire to account for

the arm pivoting when arm

"Breaks Away" from bracket. Test

break-away feature to make sure

there is enough slack wire.