Canon PIXMA MX922 Посібник з налаштування - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник з налаштування для Принтер "Все в одному Canon PIXMA MX922. Canon PIXMA MX922 31 сторінка. Getting your multifunction back on your network after a router or network change
Також для Canon PIXMA MX922: Просте налаштування (2 сторінок), Посібник з налаштування мережі (21 сторінок), Налаштування (29 сторінок), Налаштування підключення (15 сторінок), Короткий посібник (22 сторінок), Посібник (20 сторінок)

a Preparation for Connection

Before Starting Wired Connection Setup

1. Make sure that the printer is turned on.

If the power is on, a button on the Operation Panel (A) is lit.

Notes on Wired Connection

Make sure that the computer and router (A) are connected. For details on how to check the settings, refer to the manual

•

supplied with the router or contact its manufacturer.

•

The confi guration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to the manual of your network device or contact its manufacturer.

•

For offi ce use, consult your network administrator.

•

Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing

data such as your personal information to a third party.

This printer cannot be used over wireless and wired connections at the same time.

•

When using a router, connect the printer and computer to the LAN side (same network segment).

•

b Cable Connection

You will need an Ethernet cable (sold separately).

1. Remove the Cap (A) of the second port from the top located on the left side at the back of the printer.