Astralpool Jetstream Посібник з монтажу та експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Пилосос для басейну Astralpool Jetstream. Astralpool Jetstream 10 сторінок.
Друкувати сторінку
CLEANING CYCLE
The cleaning cycle of your Jetstream robotic pool cleaner is 2 or 3 hours depending on selection. After the period
has finished, the cleaner will automatically switch off through the integrated timer inside the unit. In some cases the
pool will be clean after less than 2 hours and at other times the pool will not be clean after a fully completed cycle.
The size and shape of the pool and the amount of debris present will determine the total amount of cleaning time
required.
When the cleaner slows down and constantly reverses directions before reaching the end sides of the pool, it is
sending a signal that it is time to clean or change the filter bag.
FILTER BAG MAINTENANCE
CLEAN THE FILTER BAG AFTER EACH CLEANING CYCLE
1. Unplug the power supply (Please keep the plug away from contact with the water)
2. If the unit is in the pool, gently pull the cleaner towards you using the cable until the handle is within reach.
Use the side handle (not the cable) or the wheel tube (Fig. 9) to pull the cleaner out of the pool after
allowing most of the water to drain from the unit.
3. Lay the cleaner on its back on a smooth surface (in order to prevent scratches on the machine body),
unlock and remove the bottom lid assembly. (Fig 10, 11, 12, 13)
Inst308 Jetstream Robotic Pool Cleaner Instructions V.08_12
6