Astralpool S10 Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Пилосос для басейну Astralpool S10. Astralpool S10 12 сторінок.
Друкувати сторінку
4
Installation
1. Before You Start
For best AstralPool pool cleaner performance, you will need to follow the following steps of the installation.
1. Following manufacturer's instructions, clean the filter and empty the skimmer and the pump strainer basket.
2. If your main drain is connected to the skimmer box, block off access.
3. Manually vacuum the pool.
4. Ensure circulation system is operating at maximum water flow, or you will need to re-adjust when it comes to
clean the filter baskets.
5. Adjust water flow, from all return inlets: -
a) downward and toward each other OR
b) downward and toward the centre of the pool.
FILTER
HEATER
CHECK VALVE
(Always install a corrosion resistant check
valve when any sanitation equipment,
including erosion feeders and salt
chlorination systems are installed,
see section 5.4
for more details)
SPA RETURN
*All pool suction outlets and plumbing
must be properly installed in compliance
with applicable entrapment protection
standards such as AS2610.2
Typical Water Piping Con guration
If return inlet directional fittings can't be directed far enough down to prevent water flow affecting the natural
movement of the AstralPool hose, you will need to install AstralPool return line diverters. These are available from
your local AstralPool dealer.
PUMP
a.
POOL
RETURN
s10 pool cleaner
POOL/SPA
3 WAY VALVE
SKIMMER
a.
EXTERNAL MANUAL
BY-PASS DETAIL:
USE WHEN FILTRATION RATE
EXCEEDS 500 lpm (132 gpm). REFER
TO THE MANUFACTURER'S
RECOMMENDATIONS IF USING A
DIFFERENT BRAND HEATER.
Installation Manual
SPA DRAIN*
(Suction Outlet)
EXTERNAL MANUAL
BYPASS VALVE