Canon Auto Zoom 814 Інструкція з експлуатації - Сторінка 13
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Відеокамера. Canon Auto Zoom 814. Canon Auto Zoom 814 36 сторінок. 8mm movie camera
Також для Canon Auto Zoom 814: Інструкція з експлуатації (40 сторінок)
Друкувати сторінку
Preparing for Electric Eye Operation
.
1
Set the switch dial at "R".
All
the
electric circuits are on and the shutter
is
ready to
work.
"OF
F" is the safety position in which the electric source is cut off to
prevent the shutter and the exposure meter from undesired operation.
"RL"
is for the running lock and for remote control (See page 24)
.
2
Make sure that the EE/manual aperture control ring is pushed in .
• If the EE/manual aperture control ring is pulled out, the camera is
switched to manual operations and the EE exposure control does not
work.
3
Set the variable shutter control ring at "OPEN".
The variable shutter control ring is used to adjust the exposure with
the variable shutter or to perform fadi
ng
•
• The variable shutter control lock is released when
it
is pressed in the
direction of the arrow and you can rotate the control ring freely. Then set
it at "OPEN" and press the lock back to its former position in order to
lock it
.
• The variable shutter control can be locked only at "OPEN", "2", and
"4".