Canon Auto Zoom 814 Інструкція з експлуатації - Сторінка 18
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Відеокамера. Canon Auto Zoom 814. Canon Auto Zoom 814 36 сторінок. 8mm movie camera
Також для Canon Auto Zoom 814: Інструкція з експлуатації (40 сторінок)
Друкувати сторінку
o
-
-:-
"'"':---
-
-
~
18
~
......
"
.....
,~
...
~
. .
,
~_
...
, -'> --'. - - -
.
6
Checking the exposure indicator
The trigger works in two steps.
When you press it lightly, the exposure meter circuit turns on. The meter
needle first swings rapidly and then indicates the proper exposure. When
the needle is out of the red warning marks, you are ready to
shoot.
Pull the trigger all the way to begin filming
.
• The exposure meter does not work if the switch dial is set at "OFF".
The needle on the left red warning mark means under-exposure, and
lighting must be
increas~.
The needle on the right red warning mark
means over-exposure, and exposure must be adjusted with the variable
shutter control or with an NO fi Iter (page 21)
.
• When the trigger is not pulled, the needle stays in the right red warning
mark.
• When the trigger is pulled while the switch dial is set at "RL", the meter
is working continuously and the needle moves according to the brightness
of the
subject.
7
Pulling the trigger completely
When you pull the trigger completely,
t
he film beg ins running and
you actually start
shooting.
Do not forget that zooming and panning
techniques add variety to your pictures.
PANNING
Panning is employed when shooting a scene from one position to another
by moving the camera arounq horizontally to make a
conti
nuous shot over
a wide area in one sequence.
• Do not move the camera too rapidly in any direction
,
particularly up or
down.
Use of a tripod is recommended.
• Panning shots usually start from subjects of less importance and move on
to the most important subject where they end running the film longer
through the last sequence.