Air Fantastic CAP5000 Посібник користувача - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник користувача для Очищувач повітря Air Fantastic CAP5000. Air Fantastic CAP5000 16 сторінок. Central air purifier (cap)

Друкувати сторінку

Insert the new Quad-Ion Cell into

the Retainer Ring. Using the illus-

tration, be certain the Quad-Ion Cell

is installed using the correct pin ori-

entation. Secure the Quad-Ion Cell

with four 1/4" hex head screws.

Do not overtighten the screws

to prevent them from stripping.

Firmly press the Ballast Assembly onto the four pins protruding from the

Quad-Ion Cell The Ballast Assembly should be orientated with the "air

flow" label running parallel with the length of the duct to ensure the four

pins are in line with the Four Pin Connector. Optional mounting config-

urations, such as opening the UV shields, may vary the orientation of

the "air flow" label. It's only intended to serve as a general guideline.

Using a 1/4" hex head screw driver, secure the CAP system with four self

tapping 3/4" screws being careful not to overtighten stripping the screw holes.

Outer Housing Maintenance

Never use harsh cleaners, chemicals or

abrasives on the plastic polycarbonate

housing or anodized aluminum. Only a

dry micro fiber towel or a towel lightly

moistened with water should be used to

remove any dust or other debris from the

outside of the unit.

5. Using a small cylindrical object, such as a pen,

press and hold the Lamp Reset Button for 3

seconds. This will reset the Lamp Replace-

ment Indicator. The Lamp Reset Button is lo-

cated on the bottom of the Ballast Assembly.

Lamp Reset Switch