Astrel Instruments AST-8300-A Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Системи фільтрації води Astrel Instruments AST-8300-A. Astrel Instruments AST-8300-A 6 сторінок.
Також для Astrel Instruments AST-8300-A: Посібник з автоматичного керування (14 сторінок), Початок роботи (20 сторінок)
Друкувати сторінкуAstrel Instruments
10. using
+
and
-
optical window hole
11. slightly unscrew its screw so that the blocking support is free to rotate, put it in the
unblocking position and fasten the screw again
WARNING: do not leave the screws unfastened: when moving the wheel they may hit the
border of the optical window hole and lock, breaking the filterwheel motor
12. repeat steps 10-11 for the blocking support on the other side of the filter
13. push the button of the selected filter on the
the optical window hole
14. insert the filter:depending on the camera release date, the filters holes facing the sensor
may have round or squared profiles. The round profiles wheels are compatible with
27mm diameter, 1mm thickness filters, while the squared profiles wheels are compatible
with filters up to 27.6mm and up to 2mm thickness. For the latter, after placing the filter,
put the correct spacer ring depending on the filter thickness
15. repeat step 10
16. slightly unscrew it so that the filter blocking support is free to rotate, put it in the blocking
position and fasten the screw again
17. repeat steps 15-16 for the second blocking support
18. repeat points 9-17 for each filter
...
19. put the o-ring, the optical window, the second o-ring if present and the metal ring in their
original placements
20. slightly fasten the three screws that fix the ring around the optical window
21. make the vacuum inside the camera using the vacuum pump and close the valve
22. complete fastening the three screws
Mounting Filters UG
buttons place one of the blocking support so that it is accessible from the
Filterwheel
app to center the filter hole with
5/6
AST-8300-A
rev C