Dooya DC1670 Специфікація
Переглянути онлайн або завантажити pdf Специфікація для Передавач Dooya DC1670. Dooya DC1670 2 сторінки. Emitter
Друкувати сторінкуDC1670
Emitter Specification
Version NO. : B/01
T
Type specification
LED
Up
button
Stop
button
Down
button
DC1670
Single - channel emitter
T
Technical support
Technical specification
Input voltage 3V (CR2430)
Transmitting frequency 433MHz
Transmitting power 10 milliwatt
Operating temperature -10
0
C—50
0
C
Transmssion distance 200 meters open office
35 meters on two walls
Setting
button
(P2)
Fucntion instruction
DC1670 single channel emitter;Size:80mmX80mm;
Notice: transmitter do not exposed to moisture and strike, so as not to affect life.
When you use transmitter, if found emission distance obviously short or less sensitive,
please change another same new battery. Please have batteries for recycling.
A
Matchable R tubular motor set up
Additional
f u n c t i o n
During the settings,the time between
two operation must be shorter than
4s,otherwise it will quit the setting
P2
×1
Sound from motor
hear long sound
Beep once
Power on
A
Matchable DC1680 set up
Additional
f u n c t i o n
During the settings,the time between
two operation must be shorter than
6s,otherwise it will quit the setting
Press (up+down)×1
Indicator
Stop×1
at the same time
flashing
Power on
DC1680
DC1680
DC1680
A
Matchable DC136 set up
Additional
f u n c t i o n
During the settings,the time between
two operation must be shorter than
10s,otherwise it will quit the setting
Setting
button×1
Indicator
Stop×1
flashing
Power on
DC136
DC136
DC136
Delete all the datas of the motor and
the new emitter has been programmed.
Up×1
Run or beep
for hint
OK
P2
×1
Set up is ok.
The up button control
Beep once
the motor clockwise
Down×1
Run or beep
for hint
OK
Set up is ok.
The down button control
the motor clockwise
Indicator long
Up×1
Indicator flashing
flashing
then extinguished
DC1680
DC1680
Indicator long
Up×1
Indicator flashing
flashing
then extinguished
DC136
DC136
OK
Setting
is ok
OK
Setting
is ok