Akw AKW23116 Інструкції з монтажу, обслуговування та експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкції з монтажу, обслуговування та експлуатації для Сантехнічний виріб Akw AKW23116. Akw AKW23116 16 сторінок. Basin mixer valve

Друкувати сторінку

Components

151.5 mm

51 mm

141.5 mm

Rubber Washer (44mm od)

Rubber Washer (47mm od)

115 mm

Horse Shoe Washer

15mm compression fitting

465 mm

adaptor

Fixing Bolts

Flexible inlet tails

Fixing Nuts

Connections:

The hot and cold inlet supply connections are via the 15mm compression fitting

adaptor or the 1/2" BSP fittings on the check valve and filter assemblies. These are

connected to the ends of flexible inlet tails.

The 15mm compression fitting adaptor allows connection to either flat-faced 1/2"

BSP external or 15mm compression union. The hot supply connection is through

the flexible inlet tail nearest the spout of the T301 tap, identified with a red mark.

Note: Isolation valves must be fitted adjacent to the inlets.

We recommend that independant filters, isolation and check valves are fitted in an

accessible location (not supplied).

For optimum performance hot and cold water inlet pressures should be balanced.

Ensure the pressure is within the conditions of normmal use.