Flycam FLCM-5000-Q Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Аксесуари для фотоапаратів Flycam FLCM-5000-Q. Flycam FLCM-5000-Q 11 сторінок. Handheld video stabilizer
Також для Flycam FLCM-5000-Q: Інструкція з експлуатації (16 сторінок)
Друкувати сторінку
•
Open the lever and remove the quick release
plate from the adapter. Then attach it to
your camera
(Not Included)
screwdriver
(Not Included)
•
Attach your camera setup
the adapter and tighten the lever back.
NOTE: If you wish to bypass Quick Release Plate, the camera can be directly attached to Head Plate by
following this assembly sequence:
•
Remove the Head plate from the 3-piece
Head assembly to attach it to your camera
(Not
Included). You will note several
mounting holes to adapt various cameras.
•
Keep the camera
(Not Included)
of the Head Plate and secure it properly. Do
not over-tighten this adjustment as it can
break the threaded insert.
•
The many slots located on Head Plate and
Bottom Plate allow you to easily adjust X & Y
-Axis for perfect balance. As shown, place
the assembly in line with the center of the
stabilizer post and tighten the side adjusters.
Further fine-tuning will probably be
required.
Images showing Head Plate X adjustment
Images showing Head Plate Y adjustment
using a
(Not Included)
to
in the center
4