Akw GW90 Інструкція з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Сантехнічний виріб Akw GW90. Akw GW90 4 сторінки. Shower waste

Друкувати сторінку

Suitable for wooden and solid floor installations. Use these in accordance with the shower tray instructions.

Order: 01905 823 299

Installation Instructions

(1) As a "dry run", first place

the tray into the desired

location either into wooden

or solid floors. Determine

the position, the depth and

the clearance required for

the waste with at least a 1

in 40 fall from the waste to

the outlet pipe. Ensure there

is sufficient support around

the waste area, see separate

tray instructions.

(2) Before fitting the waste,

place the nut onto the waste

pipe outlet, followed by the

backing ring and the seal.

Insert waste pipe into the

waste body and tighten the

nut. Check that the pipe

connection is correctly

assembled, sealed and

watertight by pouring some

water through it. Ensure that

the rubber clamping seal

(A) is positioned into the

recessed section on the top

of the waste body before

connecting to the tray.

(3-4) Apply flexible adhesive

to the tray and ensure that

the tray is level. Lower the

tray into position either into

or onto wooden or concrete

floors and then re-align with

the waste body.

(5-6) Ensure the clamping

ring (B) is screwed correctly

to the waste body and is

aligned with the tray. Do not

over tighten but ensure a

tight seal.

(7) Lower the waste trap

body into waste main body

and ensure a tight seal is

achieved.

(8) Fit the cover ensuring

correct location and it is

flush with the tray. Protect

the trap from debris during

installation.

orders.akw-ltd.co.uk

Technical Support: 01905 560 219