Akw M11 DigiPump Інструкція з монтажу та догляду за користувачем - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з монтажу та догляду за користувачем для Сантехнічний виріб Akw M11 DigiPump. Akw M11 DigiPump 20 сторінок.
Друкувати сторінку
For Optimum Performance
Pipe Cutter
JG TS
DO Cut plastic pipe using a pipe cutter
Do NOT use damaged pipe
Note:
Remove any chrome plating on pipework of at least 20mm before inserting this type
PIPEWORK.
Fixing pump to surface
Important: For service & maintenance purposes this product must be installed in an
accessible location.
Pipe connections must be easily accessible and a clearance of 100mm around the
base and sides is recommended.
The pump unit must be located on a vertical surface with the
inlet/outlet connections at the bottom of the unit in horizontal
alignment, with the AKW case logo uppermost.
The unit must be located away from the direct line of water jets whenever possible.
DO NOT tile up to the pump unit on the wall, only fix onto surface.
Speedfit
Pipe
Do NOT use a hacksaw to cut plastic pipe
Do NOT use Speedfit
pressure lines as they create blockages
6
®
pipe inserts on low
100mm (4in)