Cognisys SCOUT Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для фотоапаратів Cognisys SCOUT. Cognisys SCOUT 20 сторінок.
Також для Cognisys SCOUT: Посібник користувача (18 сторінок)

Друкувати сторінку

To install the battery:

1. Be sure the Repeater is clean prior to replacing the batteries otherwise dirt may

compromise the weatherproof seal.

2. Remove the four screws from the back-side of the Repeater using a Philips screwdriver.

3. Remove the Repeater back cover.

4. Install the 5200mAh battery and plug it in.

5. Align and push back cover onto the Repeater.

6. Install screws being careful not to cross-thread them – do not overtighten!

You can also power the Scout Repeater with external power using the optional power cable

available here:

https://cognisys-inc.com/3pin-extpwr-cable.html

If you are using external power you should absolutely have a fuse in the wiring (or similar

protection device).

You do not need to remove the internal battery when using external power but you should

remove the battery if the Repeater will not be used for an extended period.