Canon 500F - CanoScan LiDE Посібник із швидкого старту - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Сканер Canon 500F - CanoScan LiDE. Canon 500F - CanoScan LiDE 22 сторінки. Color image scanner - using the stand
Також для Canon 500F - CanoScan LiDE: Короткий посібник (2 сторінок)
Друкувати сторінку
Scanning on the Stand
Follow the procedure below to scan items positioning the scanner upright on the stand.
1
Gently open the document cover until it stops.
• Do not force the document cover open.
You might damage or collapse the stand.
2
Slide down the item along the document cover as
shown in the right figure.
• Scan only thin items in this upright
position such as a single sheet or a
double-folded sheet.
3
Close the document cover.
The document cover contains a magnet to help it stick to the
scanner body.
• If there is space between the joint of the
document cover and the document glass as
shown in the left figure, put the stand back,
open and close the cover once again to
reposition the joint as shown in the right
figure.
Use the scanner in the landscape or portrait position to perform the following.
• To scan thick items, such as magazines or books (p. 9).
• To scan items larger than the document glass (p. 10).
• To scan films (p. 16).
Positioning Items
Approximately 40°
Top
Alignment
Mark
Bottom
Thin Item
Document
Cover
11