Canon 700F - CanoScan LiDE Посібник із швидкого старту - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Сканер Canon 700F - CanoScan LiDE. Canon 700F - CanoScan LiDE 19 сторінок. Brochure
Також для Canon 700F - CanoScan LiDE: Брошура та технічні характеристики (2 сторінок), Брошура та технічні характеристики (2 сторінок), Брошура (10 сторінок), Брошура (8 сторінок)

Positioning the Scanner

Horizontal Position

The document cover fully opens to allow easy scanning of

large or bound documents. An oversized document can be

scanned section by section into a single image using the

stitch-assist function of MP Navigator EX. For details, see the

on-screen manual: Scanning Guide.

Hold the document cover with one hand, and press and hold

at the base hinge as you carefully lower the cover

all the way down.

Do not place items that weigh 2.0 kg (4.4

lbs.) or more on the scanner. The scanner

may not work or you may break the

document glass if you press down the

document glass firmly.

Cover the scanner with a black cloth if external light enters

around the scanned item.

Upright Position

If you are scanning thin documents (i.e., a single sheet or

double-folded sheet), this position saves the most space.

Thick documents or films cannot be scanned in this position.

Pull out the stand on the bottom of the scanner until it clicks,

and set the scanner upright on a flat stable surface. Gently

open the document cover as far as it goes (stops at

approximately 40°) and slide down the document along the

document cover.

• Do not force the document cover open; it

does not fully open when the scanner is in

the upright position.

• Always close and secure the document

cover first when lifting the scanner in the

upright position.

Positioning the Scanner

Alignment Mark

Top

Bottom

Approximately 40°

Alignment

Mark

Thin Item

Document

Cover