Canon 8800F - CanoScan - Flatbed Scanner Посібник із швидкого старту - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Сканер Canon 8800F - CanoScan - Flatbed Scanner. Canon 8800F - CanoScan - Flatbed Scanner 16 сторінок. User guide
Також для Canon 8800F - CanoScan - Flatbed Scanner: Брошура (10 сторінок), Посібник користувача (2 сторінок), Посібник із швидкого старту (32 сторінок), Посібник з експлуатації (28 сторінок)

Using the Scanner Buttons

Scanner buttons allow you to copy, scan, e-mail, and save scanned images in PDF format with a press

of a button. Simply place your document on the scanner, and then press the scanner button for the

required function. For more information, see the Scanning Guide.

PDF Buttons

PDF buttons allow you to easily create PDF

files according to your needs. Note that

these buttons are not labeled on

the scanner.

COLOR Button

Scans color images in A4 or Letter size

at 300 dpi by default.

BLACK & WHITE Button

Scans black & white images in A4 or Letter

size

at 300 dpi by default.

CUSTOM Button

Scans images in user-specified settings.

FINISH Button

Ends the operation and saves the scanned

image in a PDF file.

*The size may differ depending on your

system environment.

• Before using scanner buttons, make sure that all the software programs are installed on your computer using the

[Easy Install] option of the Setup program. See "Installing the Software" on page 2.

If the scanner buttons do not work properly, see "Troubleshooting" in the Scanning Guide.

• For Mac OS X v.10.3.x and v.10.2.x (v.10.2.8 or later): Before using the scanner buttons, you need to set Image

Capture (in [Applications] folder) to open MP Navigator EX automatically when a scanner button is pressed.

Start Image Capture, and then perform the following.

- Mac OS X v.10.3.x: Click [Options] and select MP Navigator EX1 in [When a scanner button is pressed, open:].

- Mac OS X v.10.2.x (v.10.2.8 or later): Select [Other] in [When a scanner button is pressed, open:]. Select MP Navigator

EX1.0 and click [Open]. Click [OK] and quit Image Capture.

COPY Button

Prints (copies) the scanned image with a

printer.

PHOTO/FILM Button

Opens the scanned image in the bundled

application program, ArcSoft PhotoStudio.

E-MAIL Button

Attaches the scanned image to a new e-

mail message.

The first time you press this button, you will be

prompted to select the e-mail program to use

with this function.