Canon CanoScan 9000F Посібник із швидкого старту - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Сканер Canon CanoScan 9000F. Canon CanoScan 9000F 19 сторінок. Brochure
Також для Canon CanoScan 9000F: Брошура (8 сторінок), Посібник із швидкого старту (39 сторінок)
Друкувати сторінку
- 1. Table of Contents
- 2. Safety Precautions
- 2. General Handling Precautions
- 2. Setup and Operating Conditions
- 3. Package Contents
- 4. Installing the Software
- 5. Preparing the Scanner
- 6. Connecting the Scanner
- 7. Try Scanning
- 8. Using the Scanner Buttons
- 9. Scanning with MP Navigator EX
- 10. Scanning Film
- 11. Specifications
Safety Precautions
Please read and take note of the following precautions before using the scanner and accessories.
WARNING
Indicates a warning concerning operations that may lead to death or injury to persons if not performed
correctly. In order to use the scanner safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to persons or damage to property if not
performed correctly. In order to use the scanner safely, always pay attention to these cautions.
WARNING
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities,
please move away from this product and consult your doctor.
About Locations
WARNING
• Do not place the scanner near flammable liquids such as alcohol or thinners. If the internal electrical
parts come in contact with flammable liquids, fire or electrical shock may result.
CAUTION
• Do not place the scanner in areas with high humidity, areas subject to direct sunlight, areas with high
temperatures and areas near flame sources. Fire or electrical shock may result.
• Do not place the scanner on shaky stands, unstable surfaces or surfaces subject to frequent
vibrations. If the scanner falls, it may cause injuries.
• Do not push the scanner into a narrow cabinet or put a tablecloth on it or place on a thick rug. If the
scanner has heat, it may cause fire or damage.
About the Power Supply
WARNING
• Do not plug the power cord into outlets with voltages other than the specified voltages. Incorrect
voltages may result in fire or electrical shock.
• Do not place heavy objects on, pull or excessively bend, twist or tie the power cord. Damaged wires
may cause fire or electrical shock.
• Unplug the power cord from the outlet periodically and use a dry cloth to clean the area around the
base of the outlet to ensure that all dust is removed. Also do not plug in/unplug the power cord with
wet hands. Fire or electrical shock may result.
• Do not connect excessive numbers of plugs into one electrical outlet. Fire or electrical shock may
result.
• Always plug the power cord in all the way. If it is not plugged in completely, fire or electrical shock
may result.
• Do not use cables other than the one supplied. Fire or electrical shock may result.
• Do not use extension cords in corridors or other high traffic areas where they can be stepped on or
tripped over. This could damage the cords and result in fire or electrical shock.
• If lightning strikes in your neighborhood, unplug the power cord from the outlet and refrain from using
it. Lightning strikes could cause a fire, electric shock, or damage to the scanner.
Safety Precautions
1