Akw 02130/P Інструкція з монтажу та догляду за користувачем

Переглянути онлайн або завантажити pdf Інструкція з монтажу та догляду за користувачем для Інвалідний візок Akw 02130/P. Akw 02130/P 2 сторінки. Fold down seat

Друкувати сторінку

IMPORTANT SAFETY INFORMATION

ALWAYS

Read these installation instructions

STOP

carefully before installing this product

and leave with the end user FOR FUTURE

REFERENCE.

ALWAYS

Have the seats installed by a trained and

experienced installer.

Make the seat height suitable for the

user.

STOP

ALWAYS

Attach this Seat to a surface using fixings

matched to the type of surface and

the loading conditions to be applied.

ALWAYS

Use hole reducers if seat cushions are not

STOP

used.

STOP

NEVER

Exceed the weight capacity of 25 stone

(158 Kg) (350 Ib)

STOP

NEVER

Install countersunk screws to fixing holes.

NEVER

Stand on the shower seat. This may

reduce the strength of the shower seat

and will invalidate any warranty or weight

STOP

capacity stated.

STOP

DO NOT

Place matches or cigarettes on or near

STOP

this product.

The following plastic materials are used

STOP

in this product:

Polypropylene(PP), Poly Vinyl Chloride

(PVC-U) Thermoplastic Rubber (TPR).

STOP

High Density Polyethylene (HDPE)

Polyurethane Foam (PU)

STOP

No natural Rubber or Latex used in this

product.

STOP

BEWARE

A pinch hazard may be present around

the region of the leg mechanism during

STOP

the raising and lowering of this seat.

BEWARE

making fixing holes larger will reduce the

STOP

strength of the seat and invalidate any

warranty or stated weight capacity.

This product conforms to the essential requirements of the Medical Devices

Directive 93/42/EEC and representative samples have been evaluated under

EN12182:1999 and EN12727:2000 For use solely as a shower seat (assistive,

Class 1 device).

Declaration issued under the sole responsibility of the manufacturer.

The AKW 2000 series shower seats conform to the requirements of the EU Council directive

93/42/EEC for a class 1 non-invasive transient use device, using the following harmonized

European standards in the confirming assessment: BS EN 12182:1999, BS EN 12727:2000

The measurements throughout these installation and user care instructions have been converted from metric to its equivalent in imperial, therefore all dimensions are approximate and

subject to manufacturing tolerances. These instructions are provided to advise the minimum standards of installation and recommendswhat is the best practice for the installation. Due to the

very wide variability of possible installation conditions AKW cannot provide all circumstances for the installation. AKW cannot accept any liability in connection with this information or its use. This

information is provided on the condition that the person receiving it shall make their own tests to determine the suitability for their particular purpose. Failure to install this AKW product in

accordance with supplied instructions or the making of unauthorised modifications will invalidate any warranty and may affect product safety. None of the foregoing affects your statutory rights.

Orderline

01905 823299

General Enquiries

01905 823298

Technical Help line

01905 560219

Fax

01905 823297

Website

www.akw-ltd.co.uk

Quotes & orders email

[email protected]

Enquiries email

[email protected]

Post

AKW, Pointon Way,

Hampton Lovett,

Droitwich Spa,

WR9 0LR

For the latest AKW product news

scan this QR code with your device.

What to do if something goes wrong?

In the unlikely event that you should

encounter a problem with this product,

please contact your local installer and

if this does not resolve the issue then

contact AKW technical

team who will provide further advice

and if necessary arrange for our service

engineer to visit or discuss our

comprehensive after-sales service. As

part of our quality and training program

calls may be monitored or recorded.

None of the forgoing affects your

statutory rights.

Failure to install this AKW product in

accordance with supplied instructions or

the making of unauthorised modifications

will invalidate any warranty and will

affect product safety.

06-002-045-01

2000 Series Fold Down Seat -

Installation and User Care Instructions

Read ALL instructions carefully BEFORE installation and leave with the end user

Colour: WHITE RAL 9016 / Grey to RAL 7035 or High Contrast Blue to RAL 5005

ESSENTIAL INSTALLER INFORMATION

USA

ESSENTIAL INSTALLER INFORMATION

Never exceed the weight capacity of 25stone/158kg/350lb

Adjust support legs ensuring that both legs sit firmly on a

flat surface, (maximum 1 in 40 shower base slope), when

placed in the down position.

Curved surfaces such as corners of bathtubs are not

acceptable.

This seat must be attached to a vertical surface using suitable

fixings appropriate to the type of surface and loading

conditions to be applied.

Stainless steel fixings are recommended.

Make sure all fixing holes are used. Take care not to damage

the painted surface. Do not add countersinks screws or make

any holes larger. This can reduce the strength of the frame

and invalidate any warranty or weight capacity stated.

Cushion Assembly

Position the seat pad to seat.

Note the front of the pad is

indicated.

The seat pad retainer

caps are fitted from

underneath the seat.

Each pad locating bung

has a retainer (4 in total)

Retainer cap

If a SEAT PAD is not fitted, please ensure that plugs are fitted to all holes.

02130/P

Internal Building use only

Covered by one or

more of the following

Registered Designs:

GB 3011017, EU

000548607

USA 29/249106

Pat apps:

USA 11/456352,

EU 06253480

To fit the retainer cap, it should be

rotated in a clockwise direction whilst

applying firm pressure towards the

seat pad.

The seat pad may

need to be held

in position whilst

the retainer caps

are fitted.

Be careful not to

overtighten the

retainer caps.

The retainer should be

hand tightened so that it is

a secure fit.