Canon DR-2020U - imageFORMULA - Document Scanner Довідковий посібник - Сторінка 19

Переглянути онлайн або завантажити pdf Довідковий посібник для Сканер Canon DR-2020U - imageFORMULA - Document Scanner. Canon DR-2020U - imageFORMULA - Document Scanner 40 сторінок. Class-leading flatbed scanner with single-pass duplex adf scanning
Також для Canon DR-2020U - imageFORMULA - Document Scanner: Брошура та технічні характеристики (26 сторінок), Брошура та технічні характеристики (2 сторінок), Брошура та технічні характеристики (33 сторінок), Кишеньковий посібник (32 сторінок), Кишеньковий посібник (30 сторінок), Брошура та технічні характеристики (2 сторінок)

Placing Documents

Fan the pages of the document to be scanned, and load

the document into the feeder with the scanning side

facing up.

Adjust the document guides to the edges of the

document.

IMPORTANT

• Close the business card feeder. The documents placed into the

feeder cannot be scanned if the business card feeder is open.

• Scanning curled or creased documents may result in damage to the

documents.

• Even if a document does not exceed the document feed tray's

capacity (see p. 13), pages may not feed properly depending on

the document type. In this case, decrease the number of pages in

the document feed tray.

• Open the eject tray extension if you are scanning documents that

are longer than the eject tray.

Place the document on the flatbed with the scanning side

facing down, and align the upper left corner of the

document with the positioning guide on the flatbed.

IMPORTANT

• Do not place objects other than the document to be scanned onto

the flatbed platen glass. Doing so may result in damage or personal

injury.

• Open and close the feeder gently. Excessive force may result in

damage to the feeder or breaking the scanning glass and personal

injury.

When the Scanner Is in Sleep Mode

When the scanner is not operated for a specific amount of time, it

automatically enters the sleep mode. The scanner automatically exits

the sleep mode if you initiate scanning from a computer. However, to

initiate scanning from the scanner's operation panel, you must exit the

sleep mode manually.

To exit the sleep mode manually, press the POWER button on the

operation panel. The scanner exits the sleep mode.

Scanning Side

Facing Down