Canon DR-2020U - imageFORMULA - Document Scanner Довідковий посібник - Сторінка 29

Переглянути онлайн або завантажити pdf Довідковий посібник для Сканер Canon DR-2020U - imageFORMULA - Document Scanner. Canon DR-2020U - imageFORMULA - Document Scanner 40 сторінок. Class-leading flatbed scanner with single-pass duplex adf scanning
Також для Canon DR-2020U - imageFORMULA - Document Scanner: Брошура та технічні характеристики (26 сторінок), Брошура та технічні характеристики (2 сторінок), Брошура та технічні характеристики (33 сторінок), Кишеньковий посібник (32 сторінок), Кишеньковий посібник (30 сторінок), Брошура та технічні характеристики (2 сторінок)

[Output settings] tab

Configure settings for the output method. The items that appear in

this tab differ depending on the [Output method] selected.

[File settings] tab

This tab appears when [Send by E-mail] is selected in the [Output

method] list box. The items that appear in this tab are the same as

those in the [Output settings] tab.

[Compose e-mail] tab

This tab appears when [Send by E-mail] is selected in the [Output

method] list box. Configure e-mail settings for sending the

scanned images.

In addition to these settings, you must also configure the

environmental settings to send the e-mails to which the scanned

images are attached. For details on settings, refer to the User

Manual.

[Scanner setting] tab

Configure scan conditions.

[Button assignment] tab

Configure settings to assign the job to a job button on the scanner.

If [Assign scanner button 1 to Scan First] is selected in the main

screen, assignment to job button 1 is not available.

Confirming Output

In [Select Scan Job], scanned images are output according to the

registered job settings. If [Confirm Output] is selected in the main

screen, an output confirmation screen appears after documents

are scanned, allowing you to confirm and change output settings

for the scanned images.

Hint

You can also click the CaptureOnTouch icon in the taskbar, and

enable or disable [Confirm Output] from the menu that appears.