Canon imageCLASS MF6550 Початковий посібник - Сторінка 5
Переглянути онлайн або завантажити pdf Початковий посібник для Сканер Canon imageCLASS MF6550. Canon imageCLASS MF6550 16 сторінок. Canon fax machine starter guide
Також для Canon imageCLASS MF6550: Початковий посібник (17 сторінок)
Друкувати сторінку
Connect Power Cord and Turn On the Machine
1
Main power switch
Connect the power cord into the rear socket and
the wall outlet and press the [I] side of the main
power switch to ON.
What if...
● <CLOSE COVER/LEFT COVER> is
displayed:
Make sure that the left cover is closed properly.
(See "Install Toner Cartridge," on p. 3.)
● <TONER IS NOT SET/INSERT TONER> is
displayed:
Make sure that the toner cartridge is installed
properly.
(See "Install Toner Cartridge," on p. 3.)
7
2
Without optional cassette
1 0 0 %
A 4
0 1
A
T E X T
With optional cassette
1 0 0 %
A U T O
0 1
A
T E X T
The machine enters standby mode.
WARNING
This product emits low level magnetic flux. If you use a
cardiac pacemaker and feel abnormalities, please move
away from this product and consult your doctor.
NOTE
– During electrical storms, disconnect the power cord
from the power outlet. (Any sent or received documents
stored in memory are backed up for about 60 minutes.)
– Whenever you unplug the machine, wait at least five
seconds before you plug it in again.
– Do not plug the machine into an uninterruptible power
supply (UPS).
Set the Date and Time
[
]
[
]
Numeric Keys
[OK]
[Additional Functions]
1
2
Press [Additional
Use [
Functions].
select <6. TIMER
SETTINGS>, then press
[OK].
4
5
Use the numeric keys to
Press [Stop] to return to
enter the date (day/
standby mode.
month/year) and time (in
24-hour format), then
press [OK].
Ex.
D A T E & T I M E
S E T T I N G
3 1 / 1 2
´ 0 6
1 1 : 1 9
● Entering Information
– Numeric keys: Enter letters and
numbers.
– [
] and [
]: Move the
cursor position.
– [Clear]: Deletes the character
at the cursor position, or the
entire entry if held for more
than one second.
[Clear]
[Stop]
3
] or [
] to
Confirm that
<1. DATE&TIME
SETTING> is displayed,
then press [OK].
8