DORANI 7010P Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Домофонна система DORANI 7010P. DORANI 7010P 9 сторінок.
Друкувати сторінку7 Operation
■ Call
1. When a visitor presses the call button on the door station, the
indoor Monitor rings, and the screen shows the visitor's image.
2. If there is no answer, the system will automatically reset to standby
mode after 30 seconds.
[Note]In a two door station system, if one of door stations is busy, the
other door station's indicator will flash after the call button is pressed.
■ Talk
1. Press
button on the monitor to answer the call.
2. While talking, press
[Note] Coversation wills time out after 120 seconds.
■ Monitor
1. In the standby mode, press
activity at the door station.
2. If there are two door stations fitted, to view at the different
entrances
is available by turns.
Press
button
Door station 1
3. If monitoring the front door, pressing the
talk to the visitor.
[Note] Monitoring the door station automatically ends after 30 second.
If someone calls from the door station, monitoring ends and the
monitor will chime.
■ Unlock
1. Whilst talking or monitoring the door, press
to open the door.
■ Mute setting
1. Press
button to mute ringing. When the ring is OFF, the
indicator is on.
■ Intercom between indoor phone
1. In standby press
Monitors will ring.
2. Press
button of the ringing monitor to talk. Any other monitors
on the system will stop ringing.
[Note] 1. While ringing other monitors, press
call.
button again to end the call.
button on the monitor to view
Press
button
Door station 2
button on any of the Monitors the other
Press
button
End monitor
button allows you to
button of Monitor
button to end the
7