Flying Industry Development S1PUB-DC12 Короткий посібник - Сторінка 2

Переглянути онлайн або завантажити pdf Короткий посібник для Пульт дистанційного керування Flying Industry Development S1PUB-DC12. Flying Industry Development S1PUB-DC12 2 сторінки. Rf wireless remote control radio controller / transmitter & receiver

Друкувати сторінку
We have learned remote control to the receiver. If you don't want the receiver to work with the remote control, you can delete all codes of
remote controls, which are stored in the receiver.
Operation: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all
stored codes have been deleted successfully.
LEARNING the remote control:
1) Press the button of receiver; signal LED on the receiver keeps shining. The receiver enters into status of LEARNING.
2) Press any one button on remote control. If signal LED flashes quickly 15 times and turns off, it means learning is successful.
3) Press any button on the transmitter; the receiver will learn the corresponding button on the transmitter.
4) When receiver is in the status of LEARNING, press again the button of receiver, signal LED turns off, it means learning process is
discontinued.
5) The receiver can learn several remote controls with different codes.
Application: For DC motor or lamp
Application Circuit
Button
Button
Signal LED
Signal LED
IC
IC
Antenna
Antenna
Power LED
Power LED
Relay
Relay
_
_
+
C
B
A
+
C
B
A
M
Motor
Lamp
Power supply
DC0~28V / AC110~240V
_
+
Power supply
A, B=Normally Open; A, C=Normally Closed.
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [email protected]