Canon imageFormula DR-C225W Посібник з підключення до Wi-Fi - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник з підключення до Wi-Fi для Сканер Canon imageFormula DR-C225W. Canon imageFormula DR-C225W 40 сторінок.
Друкувати сторінку
Connecting using the WPS function
To connect the computer via an access point that supports WPS, use
the Wireless Connection Setup Tool's Easy Setup method.
If the access point is using security settings (such as MAC address
filtering), change the settings to allow connection to this scanner.
To ensure good Wi-Fi communications, perform this procedure with
the scanner initially located close to the access point.
1
If the scanner is on, turn it off.
Press and hold the power button until the indicator goes out.
2
Enable the wireless LAN function of the computer.
This step is not necessary if the wireless LAN function is already enabled.
See "About the Computer's Wireless LAN Function" on p.21 for wireless LAN
function setting details.
3
Start the Wireless Connection Setup Tool.
If the Wireless Connection Setup Tool is not yet installed on the
computer, see the Setup Guide to install it.
Click [Start] - [All Programs] - [Canon DR-C225] - [Wireless Connection
Setup Tool].
In Windows 8.1/8, it appears as shown below.
From the Finder, double click [Application] - [Wireless Connection Setup
Tool].
11