Astro Pneumatic Tool 78344 Посібник

Переглянути онлайн або завантажити pdf Посібник для Інструменти Astro Pneumatic Tool 78344. Astro Pneumatic Tool 78344 2 сторінки. 10pc 3/8" drive nano pinless universal impact sockets - metric

Друкувати сторінку

MODEL:

WARNING

Study, understand and follow all instructions provided with this

product. Read these instructions carefully before installing,

operating, servicing or repairing this tool. Keep these instructions

in a safe accessible place.

INTENDED USE OF THE TOOL

The 78344 Nano Pinless Universal impact Socket Set is

designed to be used with a 3/8" drive impact wrench to drive

hex fasteners. Do not use this tool outside of the designed

intent. Never modify the tool for any other purpose or use.

WARNING

• Use of this product can expose you to chemicals

including ethylene glycol, gasoline vapors and

engine exhaust, which are known to the State of

California to cause cancer, birth defects, or

reproductive harm. For more information, visit

www.P65Warnings.ca.gov. Always wear ANSI

approved safety equipment, safety glasses and

clothing when using this product. Study,

understand, and follow all instructions provided

with this product. Failure to read and follow all

warnings and operating instructions may result in

damages and serious injury or death.

• Always wear ANSI approved goggles when using

this product. (Users and Bystanders).

• Never use this tool for any application other than

for

which it was designed.

• Only use accessories designed for this tool.

• Never alter or modify this tool in any way.

• Improper operation and/or maintenance of the tool,

modification of the tool, or use of the tool with

accessories not designed for it could result in

serious injury or death.

• Always select the correct accessories of the

correct size and design for the job that you are

attempting to perform.

• Always work in a clean, safe, well-lit, organized and

adequately equipped area.

• Do not begin repairs without assurance that

vehicle is in secure position, and will not move

during repair.

3/8" DRIVE NANO

PINLESS UNIVERSAL IMPACT SOCKETS - METRIC

78344

MADE IN TAIWAN

PRODUCT TYPE:

10PC 3/8" DRIVE NANO

PINLESS UNIVERSAL IMPACT SOCKETS

- METRIC

Before Use

When unpacking, check the parts diagram and part

number listing on page 2 to make sure all parts are

included. If any parts are missing or damaged, please

call your distributor.

PRODUCT INFORMATION:

• Pinless design allows a full 360° of freedom for the

universal head to angle and rotate

• Astro's Nano form factor, up to 11% shorter than

standard low-profile universal impact sockets

• Forged CRO-MO with lifetime warranty

DO NOT DISCARD – GIVE TO USER

Page 1