Canon iR2200 Series Короткий посібник - Сторінка 2

Переглянути онлайн або завантажити pdf Короткий посібник для Сканер Canon iR2200 Series. Canon iR2200 Series 13 сторінок. Basic & advanced copying features
Також для Canon iR2200 Series: Посібник з експлуатації (24 сторінок), Довідковий посібник (30 сторінок)

Друкувати сторінку
Canon iR2200 Series Короткий посібник

BASIC FEATURES

ORIGINAL PLACEMENT – PLATEN GLASS
To be used when copying from books, transparencies, articles that have been cut and pasted together, torn
originals or originals smaller than A5.
1. Place original on platen glass face down.
2. Align the corner of the original with the orange arrow at the top left hand corner of the platen glass.
3. Gently lower the lid.
ORIGINAL PLACEMENT – DOCUMENT FEEDER
Use the document feeder to automatically scan a stack of originals. Do not place originals with torn or curled
edges, large binding holes, or stapled sheets.
1. Place originals in feeder face up.
2. Adjust the slide guides to fit the size of the originals.
When the number of pages exceeds the number of pages that can be fed through the document feeder, use
Job Build feature (see Job Build on page 8)
CANCELLING COPY JOB
Press either the Cancel button on the touch screen or the stop (orange) button on the control panel.
PAPER SELECTION
The default setting is Auto paper select; the machine will automatically select paper depending on the
original size. Paper selection can manually be specified,
1. Press the Paper Select button.
2. Select the paper size.
CARD/TRANSPARENCIES
Use the manual feed on the right hand side of the machine, to copy onto light card (check paper weights for
your machine) or transparencies (only Canon transparencies to be used). Transparencies must never be
placed in any of the front loading cassettes.
1. Open the stack bypass tray on the right hand side of the machine.
2. Load card/transparencies in the tray and adjust the slide guides to the size of the paper.
3. The machine will automatically activate the manual feed, select paper size and media type.
4. Transparencies with paper backing ensure the sealed edge is inserted as the leading edge. The side to
be copied on is placed face up.
COPY QUALITY
To improve copy quality, select from one of the 4 original type modes. The machine will produce copies
according the type of original i.e. photo.
1. Press the original type button (default setting is Text).
2. Select the desired setting (Text, Text/Photo, Printed Image and Photo).
1